Such preventive safety measures reduce the risk of starting the appliance accidentally. 14. Recharge only with the charger specified by Tineco. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Page 5
31. Do not place or submerge appliance in standing water or try to clean flooded areas. 32. All data and technical instructions of this manual are based on results from lab tests of Tineco or designated third parties. The company reserves all rights for final explanations.
Page 6
1. Do not modify or attempt to repair the appliance except as indicated in the instructions for operating and cleaning. 2. Charge the appliance with the Tineco adaptor. Input Voltage: AC 100-240V. Both high and low voltages can damage the adaptor, appliance, or even cause danger to the user.
Page 7
Note: This equipment has been tested and found to comply with the limits for a Class B digital appliance, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Overview A. Self-cleaning Button L. Clean Water Tank (CWT) B. AUTO/MAX M. Dirty Water Tank (DWT) C. Power On/Off N. Floater D. Digital Display O. Brush Roller Cover E. Clean Water Tank Release P. Brush Roller F. Clean Water Tank Handle Q.
Page 9
Digital Display A. Self-cleaning Icon F. CWT Empty B. Brush Roller Tangled Indicator G. Power Indicator C. Dirt Monitoring Loop H. Tineco Logo (Blue to red according to the dirt I. WiFi Indicator amount) J. Battery Level Indicator D. AUTO Mode...
Removes dirt, grime, grease and tough stains from most types of hard surfaces, like tile, marble, sealed hardwood floors, and more. Always use Tineco solution in your appliance. Add one bottle cap of solution to each full tank of clean water.
Assembly How to Assemble/Disassemble Note: For water tank and brush assembly, please refer to “Operation” and “Maintenance”. To assemble the handle, insert it into the In the event that the product must be returned, appliance until you hear a click. please disassemble the handle.
Preparing for Use Before first use, please charge the appliance for 4±0.5 hours (refer to “Charging Instructions” for details). * Based on results from Tineco lab tests. Lab temperature 39.2°F (4°C) ~ 104°F (40°C). Press the button and the appliance will start in AUTO AUTO MAX mode by default.
Page 13
Warning: • Only charge the appliance with the adaptor supplied by Tineco. • During long periods of not being used, the appliance must be charged once every 3 months for optimal performance. It may take 4±0.5 hours for a full charge.
Page 14
Cleaning Mode Selection AUTO Mode • In AUTO mode, the iLoop™ sensor automatically detects how dirty the floor is and applies the appropriate amount of detergent and suction power. • A red dirt monitoring loop indicates more dirt is detected, and a blue loop indicates less dirt is detected.
Page 15
• Estimated runtime data was obtained by a Tineco Laboratory. Charging Time • A full charge takes approximately 4±0.5 hours. • Estimated data was obtained by a Tineco Laboratory using ambient temperatures between 39.2°F (4°C) to 104°F (40°C). Indicator When in Use Battery level ≥...
Page 16
In 5 minutes: Tineco indicator illuminated. After 5 minutes: all indicator lights turn off. All the functions can be performed using the Tineco app. Download the Tineco app from the App Store, Google Play and Tineco Official Site. Download on the...
Need help?
Do you have a question about the Floor One S3 Series and is the answer not in the manual?
Questions and answers