Tineco CARPET ONE SPOT Series - Smart Cordless Spot Cleaner Manual

Also See for CARPET ONE SPOT Series:

Instruction manual (184 pages)

Table of Contents

Contents

1 Important Safety Instructions
2 Specifications
3 Overview
4 Digital Display
5 Accessories
6 Assembly
7 Operation
8 Maintenance
9 Troubleshooting
10 Documents / Resources
- 10.1 References
- 10.2 Download manual

Tineco CARPET ONE SPOT Series - Smart Cordless Spot Cleaner Manual

Important Safety Instructions

SAVE THESE INSTRUCTIONS
Household use only.
When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE). Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

To reduce the risk of fire, electric shock, or injury:

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance shall not be performed by children without supervision.
The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
Do not immerse. To reduce risk of electric shock – Use only on carpet and upholstery moistened by cleaning process.
Do not allow to be used as a toy. Close attention is necessary when used by or near children, pets or plants.
To reduce the risk of fire and electric shock – Use only Tineco cleaning products intended for use with this machine.
Use only as described in this manual. Use only manufacturer's recommended attachments.
Do not handle charger, including charger plug, and charger terminals with wet hands.
Do not use with a damaged cord or plug. If appliance has been dropped, damaged, left outdoors, dropped into water, or is not working as it should, return it to a service center.
Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
Keep hair, loose clothing, fingers, and all parts of your body away from openings and moving parts.
Use extra care when cleaning on stairs.
Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
To reduce the risk of electric shock, always install float before any wet pick-up operation.
Prevent unintentional activation. Ensure the switch is in the off-position before picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents.

Always switch off the appliance before making any adjustments, changing accessories, or storing the appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
Recharge only with the charger specified by Tineco. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use appliances only with specifically designated Tineco battery packs. Use of any other battery packs may create a risk of injury and fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid comes into eye contact, seek medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 266°F (130°C) may cause an explosion.
Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
This appliance contains battery cells that are non-replaceable. Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.
Do not charge or store the appliance outdoors or inside the car. Only charge, store or use the battery in a dry indoor area where the temperature is higher than 39.2°F (4°C) but lower than 104°F (40°C). The charger is for indoor use only.
Always turn off this appliance before connecting or disconnecting the motorized nozzle.
Do not use to pick up ultrafine particles, such as lime, cement, sawdust, gypsum powder, or ashes.
Do not use to pick up sharp objects, such as metallic nails, pieces of glass, metal paper clips, or pins.
Do not use to pick up hazardous material and chemicals, such as solvent, drain cleaner, strong acids, or strong alkali.
Stop using immediately if the appliance is overheating, making unusual noises, producing unusual odors, performing low suction, or leaking electricity.
Turn cleaner OFF and disconnect from electrical outlet for long-term storage.
Always clean the Dirty Water Tank after each use to avoid potential blockage, which may lead to low suction power, motor overheating, or reduce the service life of the appliance.
Do not expose to rain.

Store appropriately indoors in a dry place after use.
Do not place or submerge appliance in standing water or try to clean flooded areas.
The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
A hazard may occur if the appliance runs over the supply cord.
Do not use the appliance when the water depth is more than 5mm above the surface.
To reduce the risk of fire and electric shock due to internal component damage, use only Tineco cleaning fluid/solution: Carpet Deodorizing & Cleaning Solution intended for use with this appliance. See the Cleaning Fluid/Solution section of this manual.

Range of Usage

This spot cleaner is to be used on carpets, upholstery, car interior and stairs, such as fiber/wool/cotton/flax/lamb cashmere and etc.
Do not use this appliance on long-pile carpet / plush carpet /Leather/ technology cloth /and etc.
Keep your appliance away from heat sources, such as fireplace or heater, to avoid casing deformation.
Do not use to pick up flammable or combustible liquids, ultrafine particles, sharp objects, hazardous material, chemicals or anything that is burning or smoking, as described above.

About Cleaning Fluid/Solution

A large amount of cleaning solution entering into the motor may cause damage to the appliance. Don't shake the machine violently.
Add solution as instructed in the Operation section. We recommend using the provided cleaning solution.
Keep out of the reach of children. Avoid contact with eyes and skin, otherwise, rinse thoroughly with water. If irritation persist, seek medical advice. If product is swallowed seek medical advice.
Do not use the product with acidic, alkaline solution, or any substances harmful to the environment.
Dirty water and solution disposal should comply with local environmental regulations.
To Reduce the Risk of Fire and Electric Shock due to internal component damage, use only TINECO CARPET DEODORIZING & CLEANING SOLUTION intended for use with the appliance.

About the Appliance

Do not modify or attempt to repair the appliance except as indicated in the instructions for operating and cleaning.
Use extra care when cleaning on stairs.
Charge the appliance with the Tineco adaptor. Input Voltage: AC 100-240V. Both high and low voltages can damage the adaptor, appliance, or even cause danger to the user.
Always install the Dirty Water Tank and Clean Water Tank properly before use.
Do not allow the appliance to get wet to avoid risk of fire or injury caused by a short circuit.

To avoid being tripped accidentally, please put away the appliance on the charging base.

Specifications

Product	CARPET ONE SPOT SERIES
AC Input	100-240V
Voltage	21.6V 4000mAh Lion
Rated Power	170W
Running Time	~40 mins
Charging Time	5~6 hrs
CWT Capacity	1.6L
DWT Capacity	0.8L
Waterproof	IPX4

All data and technical instructions of this manual are based on results from lab tests of Tineco or designated third parties. The company reserves all rights for final explanations.

Disposal

The battery contains materials that are harmful to the environment and must be removed from the appliance before it is discarded.
When removing the battery, the appliance must be powered off.
Batteries, chargers, accessories and packaging should be sorted for environmental friendly recycling. Do not put them into fire, water or soil. Do not dispose of batteries and chargers into household waste!
If battery leakage contacts skin or clothing, immediately flush with water to avoid irritation and seek medical help.

Overview

Power Button
DWT (Dirty Water Tank)
Self-cleaning Button
Power Brush
Carpet/ Upholstery Mode Switch
Handle Display
Self-Cleaning Box

WiFi/Mute/Language Switch Button
CWT (Clean Water Tank)
Power Brush Release Button
Charging Base
Power Brush
Carpet Deodorizing & Cleaning Solution
Adaptor

Digital Display

Main Unit Display

Power button
WiFi
Self-cleaning indicator
CWT empty
DWT full
Power brush uninstalled
Brush roller tangled
Battery status

Handle LED Display

Carpet mode
Fault indicator
Spraying water
Spot mode
Upholstery mode
Stain monitoring loop (Red to blue as stain is cleared)

Accessories

Note:
Accessories may vary between markets. If you require more accessories, please go to www.tineco.com or store.tineco.com.

Power Brush

SPOT/AUTO/SUCTION mode will be activated when using this brush, embedded with a motor provides the strong power to remove stains.

Deodorizing & Cleaning Solution

Removes dirt, grime, grease and tough stains from most types of carpets. Always use Tineco solution in your appliance. Add two bottle caps of solution to each full tank of clean water.

Cleaning Tool

A full brush to clean the DWT, brush chamber and opening. The tool also has a bristled end to remove dirt and mud on the roller and DWT.

Deep Stain Tool (optional accessory)

Scrubs and suctions away tough stains on carpet, upholstery and auto interiors.

Assembly

How to Assemble/Disassemble
Note: For water tank and brush assembly, please refer to "Operation" and "Maintenance".

How to Assemble/Disassemble
Install the power brush. When dissemble, press the release button to remove the power brush.

Install the self-cleaning box and place the appliance on the base.

Operation

Preparing for Use
Before first use, please charge the appliance for 5-6 hours (refer to "Charging Instructions" for details).
* Based on results from Tineco lab tests. Lab temperature 39.2°F (4°C) ~ 104°F (40°C).

Remove the Clean Water Tank.

Open the tank cap, add two bottle caps of solution.

Fill water to the MAX line and tightly close the cap.

Put the Clean Water Tank back on the base.

Use the power brush and aim it at the stain spot.

Select the Carpet or Upholstery mode according to different occasions.

Press the sub-mode button underneath the handle to select SPOT/AUTO/SUCTION mode.

Put the power brush into the self-cleaning box and place the main unit on the charging base after cleaning.

Mute/Switch Languages

Press the button to turn on/off the voice prompt.
Press the button twice to switch languages. (More voice languages will be added, please refer to the actual product for now.)

Cleaning Mode Selection
Carpet Mode

In Carpet mode, the appliance will spray a large amount of water to clean the satins, perfect for medium and low pile carpets.

Upholstery Mode

Upholstery mode can tackle stains and dirt on upholstery and car interiors.

Sub-mode
SPOT Mode (Carpet)

Spot mode is perfect for embedded dirt and tough messes.
The appliance automatically stops as stains are removed, hands-free for better cleaning experience.

AUTO Mode (Carpet)

AUTO mode can intelligently adjust water flow for easy and effective cleaning.
A red stain monitoring loop indicates more dirt is detected, and a blue loop indicates less dirt is detected.

SUCTION Mode (Carpet)

In SUCTION mode, the appliance only absorbs water and saving you the drying time.
Note: Keep sharp objects away from the digital display screen to avoid scratches and scrapes.

Runtime

Approximately 40 minutes.
Estimated runtime data was obtained by a Tineco Laboratory.

Charging Time

A full charge takes approximately 5-6 hours.
Estimated data was obtained by a Tineco Laboratory using ambient temperatures between 39.2°F (4°C) to 104°F (40°C).

App
All the functions can be performed using the Tineco app. Download the Tineco app from the App Store, Google Play and Tineco Official Site.
App

Note: The default setting for voice prompt is English, you can set other languages via App.

Indicator
When in Use

	Solid red light on the handle display: dirt sensor malfunction or blocked.
	Illuminated: CWT is empty.
	Illuminated: DWT is full or not installed, or the channel has a blockage.
	Illuminated: brush roller has a blockage.
	Illuminated: power brush is not installed.
	Illuminated: WiFi has successfully connected.
	Blinking: WiFi is connecting.
	Off: WiFi is not connected, please connect to the network.

During Charging

Battery indicator blinking.

Fully Charged

In 5 minutes: battery indicator illuminated. After 5 minutes: battery indicator off.

Voice Prompt
(Contents may vary, please in kind prevail.)

Status	Reminder
Low battery	Low battery
Upgrade firmware	Firmware upgraded
Restore factory settings	Factory settings restored
Switch to Carpet-Spot Mode	Spot mode (Carpet)
Switch to Carpet-Auto Mode	Auto mode (Carpet)
Switch to Carpet-Suction Mode	Suction mode (Carpet)
Switch to Upholstery-Spot Mode	Spot mode (Upholstery)
Switch to Upholstery-Auto Mode	Auto mode (Upholstery)
Switch to Upholstery-Suction Mode	Suction mode (Upholstery)
Connect the appliance to charger and start self-cleaning	Starting self-cleaning
Self-cleaning completed	Self-cleaning is complete, please clean the dirty water tank and the channel underneath it
Shutting down	Shutting Down
Charging the appliance	Charging
Appliance is not upright	Appliance is not upright. Place the appliance back on the charging base
Pause self-cleaning	Pause self-cleaning
Auto detecting	Auto detecting
Deep cleaning	Deep cleaning
Enter standby mode	Standby Mode
Pause water spraying	Water spraying paused
Self-cleaning stopped	Spot cleaning completed, appliance in standby mode
Checking cleanliness	Cleanliness check in progress
Place the appliance on the base after cleaning	Please turn on self-cleaning function to ensure effective cleaning
Need to clean Dirty Water Tank	Please clean the dirty water tank to prevent unwanted odors
Voice prompts on	Voice prompts on
Voice prompts disabled	Voice prompts disabled

Maintenance

Note:

For optimal performance and to prevent odors, always clean and dry DWT, power brush and power brush cover completely after each use.
Please make sure each part is installed correctly or the appliance may not work properly.
After maintenance, place the appliance on the charging base vertically. Do not expose the appliance to direct sunlight, and store it indoors in a dry place.

Power Brush Self-cleaning

Place the appliance on the charging base after use, press the button on the handle and start the self-cleaning cycle.
Note:

Ensure the charging base is plugged in for the self-cleaning.
Before self-cleaning cycle, please clean the DWT and ensure the water level in the CWT exceeds 20%.

Dirty Water Tank

When dirty water reaches the Max line, the appliance will stop working and show a reminder on the display and play a voice prompt.
Pull up the tank lid to empty the DWT. Rinse the inside of the DWT and place back into the appliance.

Power Brush

Press against the roller end cover downward.
Pull out the brush roller.
Remove the debris wrapped around the roller and rinse with water.
Fully reinsert the brush roller at an angle and push upward until it clicks securely back into place.

Power Brush Cover

Hold the upside of the cover and pull out to remove.

Rinse with water.

Charging Instructions

To charge the appliance, place the appliance on the charging base, connect the external charging cord to the charging base and plug it into the wall outlet.
To avoid tripping hazards, please place the appliance on the charging base near a wall during charging.

Only charge the appliance with the adaptor supplied by Tineco.
During long periods of not being used, the appliance must be charged once every 3 months for optimal performance. It may take 5-6 hours for a full charge.
Store indoors in a dry place. Do not expose the appliance to sunlight or freezing temperatures. Recommended temperature range: 39.2°F (4°C) ~ 104°F (40°C).

Troubleshooting

Problem	Possible cause	Solution
The appliance does not turn on	No power Auto protection for overheating	Charge the appliance Restart after cooling down
Fault indicator on handle display is on	Brush roller uninstalled or tangled CWT empty DWT full Self-cleaning needed	Check main unit display for detailed reasons
Power brush uninstalled indicator on Voice prompt: Please install the power brush and try again	The power brush is not installed	Install power brush correctly
Brush roller tangled indicator on Voice prompt: The brush roller is stuck, please clean the brush roller	The brush roller is blocked	Remove blockages
WiFi indicator is off	WiFi is not connected	Follow the in-app guide to connect to WiFi
CWT empty indicator on Voice prompt: The clean water tank is lack of water, please add water	CWT is empty	Refill CWT
DWT full indicator on Voice prompt: Please check the dirty water tank	The dirty water in DWT has reached the MAX line	Empty the dirty water and then reinstall the DWT
All lights off in operation	Battery overheat or malfunction	Cool the appliance down and restart
Battery indicator in red	Low battery	Charge the appliance, or restart
LED loop illuminates red	Dirt sensor malfunction or blocked	Remove blockages, clean the debris channel under DWT, or restart
Self-cleaning button doesn't work	Self-cleaning only works when it's charging	Place the appliance on charging base and connect to the charger
The appliance shuts off automatically Voice prompt: Appliance is not upright. Check the appliance and restart it	Appliance is detected not upright	Place the appliance upright or back on the charging base