Table of Contents
Advertisement
12. Disconnect the green ground wire from the internal ground lug.
Note
13. Disconnect the top (black) wire from the fuse holder and set the
14. On the bottom of the chassis, remove the two screws securing the
http://www.motorola.com/computer/literature
Notice where these wires are connected to make sure they are
replaced properly later.
power switch panel aside.
small cover panel and remove the cover panel (CPX2208 only).
Refer to the figure on page 3-42.
Removing and Installing the Power Supplies
3
3-41
Hide quick links:
Advertisement
Table of Contents
