Loading And Unloading A Cd-Rom Disc; Removing And Installing The Power Switch Panel Fuse; Tools You Need; Replacing The Fuse - Motorola CompactPCI CPX2000 Series Installation And Reference Manual

Loading and Unloading a CD-ROM Disc

To load a CD-ROM disc:
1. Turn ON system power.
2. Press the eject button on the front of the drive. The tray opens.
3. Place a CD-ROM disc in the tray, with the label facing up. Make
4. Push the tray in until it closes or push the eject button.
To eject the CD-ROM disc:
1. Press the eject button on the front of the drive.
2. Lift the disc out of the carrier and return it to its original container.
Removing and Installing the Power Switch
Panel Fuse
This section tells you how to remove and install the power switch panel
fuse.

Tools You Need

You need a slotted head screwdriver.

Replacing the Fuse

To remove the power switch panel fuse:
1. Disconnect the power cord(s) and set the main power switch to OFF
http://www.motorola.com/computer/literature

Removing and Installing the Power Switch Panel Fuse

sure the disc is lying flat and centered in the tray.
(O).
3
3-51