Removing And Installing The Cooling Fans; Removing And Installing The Cooling Fans; Tools You Need; Removing And Installing The Fan Tray - Motorola CompactPCI CPX2000 Series Installation And Reference Manual

Installing the CPX2000 Series System and Field Replaceable Units

Removing and Installing the Cooling Fans

3

Tools You Need

Removing and Installing the Fan Tray

3-22
This section tells you how to remove and replace the two cooling fans in
the hot swap fan tray located beneath the module cage. You can remove
the fan tray without turning off system power.
You need a slotted head screwdriver to remove or install the fan tray.
To remove the fan tray:
1. Loosen the two captive screws securing the fan tray vent to the
chassis. Refer to the figure on page 3-23.
Literature Center Web Site