Setting Touch Screen Preferences; Using The On-Screen Keyboard - HP Slate User Manual

Setting touch screen preferences

To change or test tap settings:
1. Tap the Advanced Settings icon in the lower left corner of the Home screen.
– or –
Tap Start > Control Panel.
2. Tap Hardware and Sound, tap N-trig DuoSense™ Digitizer Settings > Digitizer options tab,
and then follow the on-screen instructions.
These preferences are specific to the touch screen and the Slate.
To change or create flick assignments:
1. Tap the Advanced Settings icon in the lower left corner of the Home screen.
– or –
Tap Start > Control Panel.
2. Tap Hardware and Sound > Pen and Touch > Flicks tab.
3. Tap Navigational flicks and editing flicks, and then tap Customize.
4. Follow the on-screen instructions to change or create a flick assignment.
5. Tap OK.

Using the on-screen keyboard

Occasionally you may need to enter data into a data field. This may be required when you set up a
wireless network configuration or a weather reporting location, or when you access user accounts on
Internet sites. Your Slate has an on-screen keyboard that is displayed when you need to enter such
information into data fields.
NOTE: The appearance of the on-screen keyboard may vary by region or country.
1. To display the keyboard, tap in the first data field. Tap the small keyboard icon that is displayed.
– or –
Double-tap the keyboard icon at the left side of the screen.
– or –
Press the Keyboard button on the left edge of the Slate.
2. To enlarge the size of the on-screen keyboard, tap the lower-right corner and drag it to the
desired size.
Using the touch screen and the on-screen keyboard 9