Table of Contents
Advertisement
To initiate Hibernation:
Tap Start, tap the arrow next to the Shut down button, and then tap Hibernate.
To exit Hibernation:
Briefly slide the power switch down.
When the Slate exits Hibernation, your work returns to the screen where you stopped working.
NOTE:
If you have set a password to be required when the Slate exits Hibernation, you must enter
your Windows password before your work returns to the screen.
Using power plans
A power plan is a collection of system settings that manages how the Slate uses power. Power plans
can help you conserve power and maximize Slate performance.
The following power plans are available:
●
HP Recommended
●
Power saver
You can change the settings of these power plans through Power Options.
Viewing the current power plan
Tap the Power icon in the Top Bar of the Home screen, and then tap Power Options.
– or –
Tap the Power icon in the notification area, at the far right of the taskbar, and then tap Power
Options.
– or –
Tap Start > Control Panel > System and Security > Power Options.
Selecting a different power plan
1.
Tap the Power icon in the Top Bar of the Home screen, and then tap Power Options.
– or –
Tap the Power icon in the notification area, at the far right of the taskbar, and then tap Power
Options.
– or –
Tap Start > Control Panel > System and Security > Power Options.
2.
Select a power plan from the list.
22
Chapter 3 Power management
Advertisement
Table of Contents
