Kensington Lock Slot; Usb Interface; Reset Button - Aruba AP-505H Installation Manual

Figure 4

Kensington Lock Slot

The Aruba AP-505H Access Points are equipped with a Kensington lock slot for additional physical
security.

USB Interface

The top of this access point is equipped with a USB-A host port that is compatible with cellular modems and
other selected peripherals. When active, this port can supply up to 5W/1A to a connected device.
Figure 5

Reset Button

The reset button located on the bottom of the device can be used to reset the access point to factory default
settings or turn off/on the LED display.
Use one of the following methods to reset the access point to factory default settings:

To reset during normal operation:

To reset during power up, hold the reset button while the access point is powering up.

The system status LED will flash again within 15 seconds indicating that the reset is completed. The access
point will now continue to boot with the factory default settings.
To toggle the LED display between Off and Blinking:

During the normal operation of the access point, shortly press and release the reset button using a small,
narrow object, such as a paperclip.
Power
Both ethernet ports support PoE-in (AP is a PoE-PD device), allowing the device to draw power from compliant
PoE power sources. If PoE is not available, the access point has a single 48V DC power input to support the AP-
AC-48V36C AC-to-DC power adapter kit (sold separately). When both PoE and DC power sources are available,
the DC power source takes precedence. In that case, the access point simultaneously draws a minimal current
from the PoE source(s). In the event that the DC source fails, the access point switches to the PoE source(s).
4
Ethernet Port Pin-Out
AP-505H (USB)
1.Hold the reset button for more than 10 seconds while the access point is running.
2.Release the reset button.
Signal Name
RJ45 Female
Pin-Out
BI_DA+
1
BI_DA-
2
BI_DB+
3
BI_DC+
4
BI_DC-
5
BI_DB-
6
BI_DD+
7
BI_DD-
8
Function
Bi-directional pair +A
Bi-directional pair -A
Bi-directional pair +B
Bi-directional pair +C
Bi-directional pair -C
Bi-directional pair -B
Bi-directional pair +D
Bi-directional pair -D
Aruba AP-505H Access Points | Installation Guide