Ferroli Napoli 600 Instructions For Use & Instalation page 42

IMPORTANT:
- In order to avoid overheating, do not cover the emitter.
The emitter itself is marked with the standard
"Do not cover" symbol.
- You must not sit on the emitter.
- This appliance is not intended for outdoor use.
- If the power cord is damaged, it must be changed by the
manufacturer, its after-sales service or persons qualified
to do so, to avoid possible danger.
- The emitter should not be located underneath an electri-
cal connection. The electric supply line should be protec-
ted with a high sensitivity differential device.
- The emitter must be installed so that around it there is
sufficient space for proper circulation of hot air, with a mi-
nimum distance of 100 mm to curtains, furniture, etc. An-
yone who is in the bathtub or shower should not have
acess to the switches and other power operation devices,
respecting 0.6 m distance between the emitter and the
bath or shower.
- Mounting is an important part of safety. To perform the
cor-rect installation, go to MOUNTING section.
- This appliance can be used by children aged 8 years and
above and persons with reduced physical, sensory or
mental abilities or lack of experience and knowledge, if
42
EN
N A P O L I
A73023140