INSTALLATION INSTRUCTIONS
To ensure that surrounding surfaces do not exceed 65 °C above room temperature, surrounding objects must be
positioned at distances in accordance with the table below.
This distance is required to access the rear of the stove, to the power supply connector, the on off pellet-mode
switch, and for maintenance and cleaning of the pellet feed system.
800 mm required
behind the gear
motor access panel
Page 7 sur
XD, on 14/05/2018
ARATOS Plug-in
FLOOR PLAN OF STOVE INSTALLATION
41
stove
dual
Concrete slab
model 6490 00
Rear
wall