Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Feelworld LIVEPRO L1
Summary of Contents for Feelworld LIVEPRO L1
- Page 1 LIVEPRO L1 LIVEPRO L2 Multi - format Video Mixer USER MANUAL...
- Page 2 Thank you for your purchasing our product! In order to let you quickly grasp how to use this signal switcher, the following is the detailed product instruction.You can read it and how to use it before using the switcher. Please read all the information we provide carefully, and brake you to use our products correctly.
- Page 3 Features USB capture video complying with UVC for live streaming 4 CH HDMI inputs 2” TFT display on board to live preview 4 inputs Auto cut and manual switch (T-Bar) 14 transition effects on T-Bar ...
-
Page 4: Table Of Contents
CONTENTS 1. Production Instruction............. 5 1.1 Product Overview............. 5 1.2 System Connection............5 1.3 Front Panel............... 6 1.4 Interface Panel..............7 2. Product Using..............7 2.1 MENU................7 2.2 Main Menu..............8 2.2.1 INPUT................8 2.2.2 HDMI................8 2.2.3 USB3.0................9 2.2.4 AUDIO................ - Page 5 3. Switch Input Source............14 4. Software Operation............14 5.OBS Streaming..............27 6.Streaming Setting............29 7. Upgrade................31 8. Specification..............35...
-
Page 6: Production Instruction
1.Product Instruction 1.1 Product Overview LIVEPRO L1/ LIVEPRO L2 is a mini signal switcher and mixer which is able stream 6-picture PVW or PGM from any one out of the 4 HDMI inputs to any live broadcasting platform via the third party live streaming software such as OBS. -
Page 7: Front Panel
1.3 Front Panel TFT display To display 4 inputs and menu PUSH/Y 1. Knob, turn to select menu item, push to confirm 2. Work as a quick button to switch HDMI Out between 6-Picture PVW and PGM when TFT is under the state of previewing 4 inputs. -
Page 8: Interface Panel
MIC to Line or connect to MIC interface of computer directly AUDIO IN / OUT when connecting microphone; AUDIO Out, audio output port, connect to loudspeaker, headset, etc. Product Using MENU When LIVEPRO L1/ L2 is power on, the native TFT display show starting up... -
Page 9: Main Menu
page. 2.2 Main Menu The menu will automatically exit after about 5 seconds when there is no operation. 2.2.1 INPUT Push MENU and select the first menu item <Input> Push knob to enter <Input> menu 2.2.2 HDMI Push MENU and select the second menu item <HDMI> Push knob to enter <HDMI>... -
Page 10: Usb3.0
The AUDIO IN is a linear input interface, which is connected to digital signal. The microphone collects analog signals, so when the microphone is connected to the LIVEPRO L1 audio input interface directly, there is no way to receive audio. -
Page 11: Ip Setting
3. If there is wireless microphone and it with earphone interface, please connect this interface to AUDIO IN of LIVEPRO L1. Note: Because there are variety of wireless microphone, if you can’t use normally when connect to the LIVERPRO L1 directly, please use it with audio interface or amplifier. -
Page 12: Info
INFO: Show the SN, IP, MAC,MCU version and VIDEO version. 2.3 BUTTON SW On LIVEPRO L1 push button SW, the TFT will show the transition effect menu <MIX>. The <MIX> LED indication beside will light up. Push again, it will skip to the next menu <MODE>, again to <PIP >... -
Page 13: Mode
Wipe to Bottom Right Iris Cross Wipe to Left Wipe to Top Center Split Horizontal Center Split Vertical Cross Inwards Blinds Vertical Box Inwards Iris Round 2.3.2 MODE Keep pushing the button SW to open up MODE menu. MODE: FAST or T-Bar TIME: 0.5-5.0S Choose FAST, the switching will be without transition effect but in set time. -
Page 14: Pip
2.3.3 PIP (Picture in Picture) Push SW button 3 times to open PIP menu. PIP menu offers 9 layouts for main picture and sub picture. PIP operation 1. Decide which source to be the main picture, select and switch it to PGM when PIP is OFF 2. -
Page 15: Switch Input Source
4.Software Operation Connection Way 1. Connect the LAN port of the computer to the LAN port of LIVEPRO L1, manually set the IP for the computer and LIVEPRO L1, you can connect LIVEPRO L1 and the computer to the same LAN. - Page 16 IP on LIVEPRO L1/L2, you can connect the computer and LIVEPRO L1/L2 to the same LAN. Install dedicated software named XPOSE to control LIVEPRO L1/L2. Right click the setup exe file . Choose Run as administrator to open the exe and install the software.
- Page 17 For example, clicking Button M can open up menu as on the device. If it is the first time for you to use, we suggest you watch our User Guide video. Click the drop down arrow and click to play the user guide video. INPUT INFO...
- Page 18 HDMI Output USB3.0 Output <MIX> Choose switch time and transition effect. When Mix Mode set as Fast, transition Time range 0.5~5s, switch input source by mouse on XPOSE software, PST is switched to PGM automatically and PST and PGM display the same input source.
- Page 19 <PIP> Choose layout mode for PIP Live Streaming Capture Device: Choose FEELWORLD USB3.0 Capture H.265: When it is ON, users can watch Preview or PGM streaming back on XPOSE software. The streaming back content is subject to USB 3.0 output setting.
- Page 20 AUDIO TEST PATTERN Output: HDMI/USB Test Pattern: Off/Color Bar/Pure Color When Test Pattern is Pure Color the value of Red/Green/Blue is from 0~255.
- Page 21 HDMI Output Setting DVI/HDMI: Choose output type as DVI or HDMI, default is HDMI. Bits: 8bit/10bit/12bit, default is 8bit. Color Space: Video or Image, default is image. DE On/Off: On/Off DE H Pos: input value to adjust output horizontal position DE V Pos: input value to adjust output vertical position DE H Size: input value to adjust output horizontal size DE V Size: input value to adjust output vertical size...
- Page 22 IP Setting Manually set Gateway, MASK and IP for the device. DHCP: When it is ON, IP, Mask, Gateway will be automatically allocated. OFF DHCP Set IP, Mask and Gateway manually.
- Page 23 On LIVEPRO L2, FX contains 3 features: Chrome Key, PTZ Camera Control and Logo Chroma Key Preset: Customize, black background, red background, blue background, green background, and white background. Switch: On/Off Mode: Select Key In or Key Out. Alpha: The adjustment range is between 0~255. The color space is R,G,B by default.
- Page 24 PTZ Camera Setting Camera: choose camera 1~8 Enable: Choose On to enable the LAN communication of the chosen camera. Zoom：Click + - to Zoom in and out Focus: Slide Auto to On usually Brightness: Click + - to adjust Preset: Load position and zoom setting of camera lens from View 1~20 Save: Save position and zoom setting of camera lens to View 1~20 Pan/Tilt Speed: Adjust the lens moving speed.
- Page 25 Logo Path: Choose logo bin from local computer or U disk. Color: Adjust Red Green Blue value Transparent Switch: On/Off X, Y: Adjust logo position...
- Page 27 Version Info T-Bar Calibration Slide on T-bar Calibration, Push the T-bar to the right side. Slide on step 2, Push the T-bar to the left side. Slide on step 4, Calibration successful will show up, indicating calibration is finished. Factory Reset...
-
Page 28: Obs Streaming
5.OBS Streaming LIVEPRO L1 / L2 is compatible with many third party steaming software, we recommend OBS, which available download https://obsproject.com/download. Download the software and update to the latest version. 1.Click”+”icon 2. Choose video capture device 3. Click video capture device to open up setting page 4. - Page 29 Audio Setting When there is no audio playing first check the video source see if the it is set in default value and then check the audio setting on OBS. 1. Set Default for the audio source.
-
Page 30: Streaming Setting
2. Audio setting on OBS. Choose Audio, click Setting and choose audio device (Mic/Auxiliary Audio Device) 6.Streaming Setting 1. Find the UL and Live Streaming Code provided by streaming broadcast website. 2. Copy rtmp address and broadcast code. 3. Back to OBS, click setting in the lower right corner and click “Stream”. Choose Stream Type as “Custom Streaming Server”... -
Page 32: Upgrade
1. Tools：Upgrade package, XTOOL V1.0.1.6, upgrade cable 2.Upgrade Method: LAN port upgrade 2.1 Turn on the power on LIVEPRO L1 and use LAN cable to connect device. 2.2 The default IP is 192.168.0.099, so make sure the PC and device are in the same IP segment. - Page 33 2.5 Upgrade Program After communication setting is done, the status light in bottom left turns green.Choose the upgrade file and open it. Usually, choose MCU or FPGA bin file to upgrade. After selecting, click upgrade.
- Page 34 2.5.1 During the process of upgrading, each upgrading status and upgrade result of each program file is showing.
- Page 35 2.5.2 After upgrade is done, there will pop up a window showing “New Version Upgraded” then then users need to reboot the device to let the new version take effect. 2.5.3 Click “Version” XTOOL will show the latest version info of the device so that users can check if the upgrade is successful or not.
-
Page 36: Specification
8.Specification Input HDMI In 4×HMDI-A HDMI Out 1×HMDI-A USB3.0 1×USB TypeA 1×3.5mm Stereo Jack Connections Audio 1×3.5mm Stereo Jack Communication LAN 1×RJ45 Power 1×DC Jack HDMI SMPTE:720p@50/60|1080i@50|1080p@23/24/ 30/50/60 VESA:1024 X 768@60|1280 X 720@60|1280 X Input 768@60 |1280 X 800@60|1280 X 1024@60|1360 Resolutions X768@60|1366 X 768@60|1440 X 900@60|1600 X1200@60|1680X1050@60|1920X1080@60|...