Feelworld LIVEPRO L1 User Manual page 24

PTZ Camera Setting
Camera: choose camera 1~8
Enable: Choose On to enable the LAN communication of the chosen camera.
Zoom：Click + - to Zoom in and out
Focus: Slide Auto to On usually
Brightness: Click + - to adjust
Preset: Load position and zoom setting of camera lens from View 1~20
Save: Save position and zoom setting of camera lens to View 1~20
Pan/Tilt Speed: Adjust the lens moving speed.
Positioner: to adjust the lens left right up down position
OLD IP: the current IP address of the camera
New IP: the new IP address just typed in.
Port: Set port number for PTZ camera. PTZ control support Visca protocol, port
number is 1259 by default. LIVEPRO L2 supports control PTZ cameras in same
IP address with different port number.
Note: Not all cameras can be set IP and port number on XPOSE, for those
cameras, IP and port number set can be done on web.
23