Feelworld LIVEPRO L1 User Manual page 16

set the IP on LIVEPRO L1/L2, you can connect the computer and LIVEPRO
L1/L2 to the same LAN.
Install dedicated software named XPOSE to control LIVEPRO L1/L2.
Right click the setup exe file .
Choose Run as administrator to open the exe and install the software.
After software is installed, click the icon and login the software. Click
SERACH to search LIVEPRO L1/ L2 device.
After searching, all available devices in the subnet can be found, up to 128
devices can found if there are.
Select the desired device by SN and IP and enter the management interface.
The software interface is a simulation of operation panel on real LIVEPRO
L1/L2 device.
15