Operation; Maintenance And Cleaning; Technical Data - VOLTCRAFT BS-10 Operating Instructions Manual

Operation

- Connect the borescope; start-up of the program "AMCAP" as described under "Initial opera-
tion" and select the driver "Telescope driver" under "Devices".
- The camera picture is displayed.
- Via the controller "3" the camera brightness can be adjusted.
Main menu bar
File Set Capture File
Allocate File Size
Save Captured Video Saving of a recorded video sequence
Exit
Options Preview
Capture Start Capture
Stop Capture
Set Frame Rate
Set Time Limit
Under the main window, the amount of the recorded images is displayed in the status line.
The supplied driver is „TWAIN32 compatible". Thus, the camera can be operated
with every program that supports this interface.
Snapshot
- In order to save individual pictures, press the key "6" on the borescope. Another window
opens displaying the snapshot image.
- Under the menu point „File" you can save the picture (Save) or discard and exit (Exit).
- Under the menu point "Rotate orientation" you can rotate the picture.
Magnetic top
The magnetic top can be placed on the camera head. In this way, lost metal parts can be
searched for and found.

Maintenance and Cleaning

The product requires no servicing on your part apart from occasional cleaning. Use a soft, anti-
static and lint-free cloth for cleaning.
Rinse the gooseneck of the borescope carefully with clean water after each application in liq-
uids and dry it before storing it in the case.
Disposal
Electronic products are raw material and do not belong in the household waste.
When the device has become unusable, dispose of it in accordance with the
current statutory regulations at the communal collection points. Disposing of it-
among the household waste is prohibited.

Technical Data

Resolution
Frame rate
Picture
White comparison
Exposure to light
Video format
Camera illumination
USB port
Power Supply
Ambient/ operating temperature
Cable length:
Total length of device
Effective length of borescope
Minimum Bending radius
Diameter of camera head
Lens coverage
Focus
Weight without accessories
Selection of the memory location for video recordings
(avi). The ending ".avi" must be indicated.
Set the memory size The available size is displayed.
Under the menu point "Capture File Size" the size can
be entered.
Exit the program
Real-time display in the main window
Start of a video recording. Confirm the displayed stor-
age location with "OK".
Stops the recording.
Set frame rate for the recording (Pictures/sec.)
Input of a max. recording time in
seconds
640 480 Pixel (VGA)
30 fps (pictures/sec)
24 Bit RGB Colour (1/6" CMOS)
automatic
automatic
AVI
2 LEDs, white
USB 1.1
5V via USB
0 to +45°C
approx. 200 cm
88 cm
66 cm
6 cm
1.4 cm
54°
> 6cm
approx. 320 g
Impressum /legal notice in our operating instructions
These operating instructions are a publication by Voltcraft ® , Lindenweg 15, D-92242 Hirschau/Germany, Phone +49 180/586 582 7 (www.voltcraft.de).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2009 by Voltcraft ®