Wiznet WizFi250 Programmer's Manual page 9

[OK]
Format:
AT+WSEC=?
Meaning: Get Security Setting of Current Mode
Response:
<WiFiMode>,<SecType>,<Key>
[OK]
AT+WNET
Format:
AT+WNET=<DHCP>,<IP>,<SN>,<GW>
Meaning: Network Configuration
<DHCP>: DHCP On/Off (Optional)
Parameter
0
1
Mode
STA
AP
<IP>: IP Address (Optional)
<SN>: Subnet Mask (Optional)
<GW>: Gateway Address (Optional)
Mode
STA
AP
* When you turn DHCP On in STA Mode, <IP>,<SN>,<GW> are not needed. If you input them at this
time, they will be stored in the memory. They can be used later when set as Static(DHCP Off) without
inputting these parameters.
* In AP mode, DHCP Server will always run despite DHCP option, and Gateway option will not be used, So
both options will be ignored.
2020/11/26 12:13
DHCP Off, Static
DHCP On, DHCP Client
DHCP Client On/Off
Not used. if any, it will be ignored
AP(Router) gateway address
Not used. if any, it will be ignored
8/81
Meaning
Meaning
Meaning
WizFi250 Programmer's Guide