Amana 4KNED5800TQ0 Use And Care Manual page 18

6.
Connect ground wire
Place hooked end of ground wire power supply cable
under the center terminal block screw (hook facing right).
Squeeze hooked end together and tighten screw.
18
7.
Connect active wire
Place hooked end of the active wire (brown) power supply cable
under the left terminal block screw (hook facing right). Squeeze
hooked end together. Tighten screw and strain relief screw.
Finally, reinsert tab of terminal block cover into slot of dryer rear
panel. Secure cover with hold-down screw. Now, go to
Venting Requirements.