Table of Contents
Advertisement
DRYER CYCLE KNOB
1
Use your Dry Cycle Knob to select available cycles on your
dryer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
TEMPERATURE FABRIC (for use with
2
Manual Cycles only)
Select a drying temperature based on the fabrics in your
load. If you are unsure of the temperature to select for a
load, select the lower setting rather than the higher setting.
NOTE: The Air Dry Temp/Fluff Air/No Heat Fluff Feature
is not available on the Automatic Cycles (depending on
model).
WRINKLE SHIELD™
3
When you are unable to remove a load of clothes from the
dryer as soon as it stops, wrinkles can form. The WRINKLE
SHIELD™ option periodically tumbles, rearranges, and
fluffs the load to help keep wrinkles from forming.
Automatic
Activates at the end of the cycle if you do not open the
dryer door within a few minutes. This feature periodically
starts and stops the dryer, tumbling the load without heat
up to 30 or 40 minutes, depending on model.
Option
Set the WRINKLE SHIELD™ selector knob to ON or OFF
at any time before the cycle has ended. Get up to 30
to 40 minutes (depending on model) heat-free, periodic
tumbling at the end of a cycle.
6
End of Cycle Signal
4
The End of Cycle Signal sounds when the drying cycle is
finished. On some models the End of Cycle signal is fixed.
On others the End of Cycle Signal is selectable and the
signal will sound only if set to On.
NOTE: When the Wrinkle Shield™ setting is selected
and the End of Cycle Signal is On, the signal sounds every
few minutes. The signal stops when you open the door or
turn the Cycle Control knob to Off.
START/PAUSE BUTTON
5
Press to start a cycle, or press once while a cycle is in
process to pause it.
Advertisement
Table of Contents
