Table of Contents
Advertisement
4.
Set Temperature Fabric
Set the Temperature selector to the recommended cycle for
the type of fabric being dried. See Cycle Guide for temperature
suggestions. On some models, temperature is included in the
cycle selections.
NOTE: Not all options and settings are available with all cycles
and/or models.
5.
Select cycle options (if desired)
Add additional options by turning the knob.
NOTE: Not all options and settings are available with all
cycles and/or models.
6.
Press Push to Start to begin cycle
Press the Push to Start button to begin the cycle.
7.
Remove garments promptly after
cycle is finished
Promptly remove garments after cycle has completed to
reduce wrinkling. If you will be unable to remove the load
promptly, turn the Wrinkle Shield button to ON at any time
before the cycle has ended.
Wrinkle Shield™
Automatic activates at the end of the cycle if you do not
■
open the dryer door within a few minutes. This feature
periodically starts and stops the dryer, tumbling the load
without heat up to 30 or 40 minutes, depending on the
model, to help avoid wrinkling.
You may set the WRINKLE SHIELD™ selector knob to On.
■
Dryer will periodically start and stop, tumbling the load
without heat for up to 30 or 40 minutes, depending on your
model, to help avoid wrinkling.
NOTE: A signal will sound periodically when the WRINKLE
SHIELD™ setting is selected, but only if the End of Cycle
signal knob is On.
9
Advertisement
Table of Contents
