Custom Reminders; Reset Settings; Energy Saving Default; System Test Modes - Lennox ELITE Series Installation Instructions Manual

Gas furnace upflow / horizontal air discharge
Table of Contents

Advertisement

If the system is running in compressor protection,
the home screen displays "WAIT" only if there is
cooling call for the compressor (Y1).
If compressor protection is running and there is a
demand for electric heating, the system waits for the
compressor protection timer to expire.

Custom Reminders

Two custom reminders may be rename on this
screen to the desired name (name is limited to 19
characters). After entering the new name, touch the
done key to return to the customer reminder screen.
To set a reminder go to the User Settings screen and
select reminders. The reminder setting screen will
appear and a list all of the predefined reminders plus
the two custom reminders will appear at the end of
the list.
Scroll to CUSTOM REMINDER 1 or 2 (or renamed
titles). Touch the title to select the reminder. By de­
fault all reminders are set to disabled. Touch disable
to choose from 3mon, 6mon, 12mon, 24mon or cus­
tom date.
When finished, touch < to return to previous menu.

Reset Settings

To reset the thermostat to factory defaults, scroll to
RESET SETTINGS and touch to select. Read the
message and to continue touch CONFIRM.
RESET SETTINGS erases all programming and
returns the thermostat to the factory conditions,
including the installer settings. Use this only as a
last resort.

Energy saving Default

Energy saving recommended set points for heating
and cooling can help save energy. The time and
temperatures reference in table 1 are pre-pro­
grammed into the thermostat to achieve energy sav­
ings.
Scroll to ENERGY SAVING DEFAULT and touch to
select. Read the message on the screen and to con­
tinue, touch CONFIRM.
Table 1. Energy Saving Set Points
Time
Heating
Wake
70°F (21°C)
Leave
62°F (17°C)
Return
70°F (21C)
Sleep
62°F (17°C)

System Test Modes

After the thermostat has been installed and set-up,
the installer may run a system test function (ac­
12
IMPORTANT
Cooling
78°F (25°C)
85°F (29°C)
78°F (25°C)
82°F (28°C)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents