Lennox ELITE Series Installation Instructions Manual page 78

S
Radiant heat from sun or appliances.
S
Concealed pipes and chimneys.
S
Unheated (uncooled) areas such as an
outside wall behind the thermostat.
Figure 1. Removing Back Plate
4. Use steps A through J (step J applicable when
using provided wall plate) to install the thermo­
stat.
CUT OR DRILL A SMALL HOLE
FOR THERMOSTAT WIRING
A
PULL ABOUT 3" OF THERMOSTAT
WIRE THROUGH OPENING AND RE­
MOVE OUTER THERMOSTAT WIRE
JACKET.
THIS WILL HELP IN
ROUTING THE THER­
MOSTAT WIRING TO
THE PROPER THER­
MOSTAT TERMINALS
5
¾" x ¾"
B