Aastra 53i Release Note page 62

IP Phone Release Notes 2.1
Sylantro Interoperability Features
Parameter –
sip lineN autodial timeout
AutoDial Timeout
(in Web UI)
Description
Format
Default Value
Range
Examples
56
Aastra Web UI Advanced Settings>LineN>Autodial Settings
Configuration Files aastra.cfg, <mac>.cfg
On a per-line basis, this parameter specifies the time, in seconds, that
the phone waits to dial a preconfigured number after the handset is
lifted from the IP phone cradle.
If this parameter is set to 0 (hotline), the phone immediately dials a
preconfigured number when you lift the handset. If this parameter is set
to a value greater than 0, the phone waits the specified number of
seconds before dialing the preconfigured number (warmline) when you
lift the handset.
Default is 0 (hotline).
Integer
0
0 to 120
sip line1 autodial timeout: 30
RN-001029-00, Rev 03, Release 2.1