Activation of the thermal protection is indicated by a steady pulsing of commu-
nication LED, switching off of the output circuit and the lack of its reactivation
possibility. After lowering the temperature to a safe value the output circuit will
remain switched off until restarted.
Devices of the F&Wave system
Transmitters
flush-mounted
FW-RC5
remote controls
FW-RC4
FW-RC10
Technical data
power supply
control input
power consumption
operating mode
standby
output load capacity
radio frequency
working temperature
terminal
tightening torque (max)
mounting
dimensions
ingress protection
Receivers
Single relay
Double relay
Universal dimmer
Roller blind controller
Two-channel LED controller
Box Ø60
FW-R1P
FW-R2P
FW-D1P
FW-STR1P
FW-LED2P
10÷16 V DC
10÷16 V DC; <3mA
0.40 W
0.25 W
2× 6 A / 12 V DC
868 MHz
-25÷65°C
2.5 mm² screw terminals
0.4 Nm
TH-35 mm rail
1 module (18 mm)
IP20
- 6 -
DIN rail
FW-R1D
FW-R2D
FW-D1D
FW-STR1D
FW-LED2D