F&F FW-LED2D Manual

F&F FW-LED2D Manual

Two-channel led controller

Advertisement

Quick Links

FW-LED2D
Two-channel LED controller
12 V DC
Do not dispose of this device to thrash with other unsorted waste! In accordan-
ce with the Waste Electrical and Electronic Equipment Act any household electro-wa-
ste can be turned in free of charge and in any quanti ty to a collecti on point established
for this purpose, as well as to the store in the event of purchasing new equipment (as
per the old for new rule, regardless of brand). Electro-waste thrown in the trash or aban-
doned in the bosom of nature pose a threat to the environment and human health.
Description of the system
F&Wave is a family of wireless devices controlled by radio with a range of up to 100
meters*. The receivers are available in either a DIN-rail mounting version (housing 1S)
or a Ø60 flush-mounted version. The transmitters are available as handheld remo-
te controllers or as a flush-mounted version. The receivers relay control signals. The
device that receives a control signal from the transmitter will automatically send it
forward, which allows to increase the range of the remote control.
* Range of up to 100 meters in open space without any interfering factors. In building conditions and in the presence of
interference sources (power lines, transmitters, etc.) the actual range may be smaller.
F&F Filipowski sp. j.
ul. Konstantynowska 79/81, 95-200 Pabianice
tel./fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: fif@fif.com.pl
- 1 -
Wireless system

Advertisement

Table of Contents
loading

Summary of Contents for F&F FW-LED2D

  • Page 1 Konstantynowska 79/81, 95-200 Pabianice tel./fax (+48 42) 215 23 83 / (+48 42) 227 09 71 www.fif.com.pl; e-mail: fif@fif.com.pl FW-LED2D Two-channel LED controller 12 V DC Do not dispose of this device to thrash with other unsorted waste! In accordan-...
  • Page 2: Features Of The Module

    Installation of this device should be carried out by a qualified installer after reading this manual. Dismantling the casing of the device will au- tomatically void the warranty. Before starting the assembly, make sure that the connecting wires are not live. Conditions of storage, transport and use affect the proper operation of the device.
  • Page 3: Description Of The Device

    Description of the device Connection 1 - +12 V DC power supply 3 - 0 V power supply 4 - control input - channel 1 6 - control input - channel 2 7/9 - output-lighting - channel 1 10/12 - output-lighting - channel 2 Control inputs do not cooperate with backlighted buttons.
  • Page 4: Load Capacity

    Load capacity The actual maximum load depends on the na- 2× 6 A/12 V DC ture and design of the receiver. For more information visit: www.fif.com.pl. Light bulb or the packaging of the light bulb must be clearly marked with a symbol or description explicitly indicating that the bulb is designed to work with dimmers.
  • Page 5: Remote Buttons

    Each channel of the receiver can be paired with eight different transmit- ters (remote buttons). Pairing with more buttons will remove the first en- tries made. Unpairing To clear the list of transmitters cooperating with the receiver, press the PROG button and hold it down for at least 10 seconds.
  • Page 6: Technical Data

    Universal dimmer FW-D1P FW-D1D FW-RC4 Roller blind controller FW-STR1P FW-STR1D FW-RC10 Two-channel LED controller FW-LED2P FW-LED2D Technical data power supply 10÷16 V DC control input 10÷16 V DC; <3mA power consumption operating mode 0.40 W standby 0.25 W output load capacity 2×...
  • Page 7: Warranty

    Warranty F&F products are covered by a 24 month warranty from the date of purchase. The warranty is effective only with a proof of purchase. Contact your dealer or directly with us. For more information on the procedure for submitting a warranty claim visit our web- page: www.fif.com.pl/reklamacje Compliance with the standards PN-EN 60669, PN-EN 60950, PN-EN 55024, PN-EN 61000,...

Table of Contents