Download Print this page
F&F FW-STR1D Manual

F&F FW-STR1D Manual

Roller-blind controller

Advertisement

Quick Links

FW-STR1D
Roller-blind controller
230 V AC
Do not dispose of this device to thrash with other unsorted waste! In accordan-
ce with the Waste Electrical and Electronic Equipment Act any household electro-wa-
ste can be turned in free of charge and in any quanti ty to a collecti on point established
for this purpose, as well as to the store in the event of purchasing new equipment (as
per the old for new rule, regardless of brand). Electro-waste thrown in the trash or aban-
doned in the bosom of nature pose a threat to the environment and human health.
Description of the system
F&Wave is a family of wireless devices controlled by radio with a range of up to 100
meters*. The receivers are available in either a DIN-rail mounting version (housing 1S)
or a Ø60 flush-mounted version. The transmitters are available as handheld remo-
te controllers or as a flush-mounted version. The receivers relay control signals. The
device that receives a control signal from the transmitter will automatically send it
forward, which allows to increase the range of the remote control.
* Range of up to 100 meters in open space without any interfering factors. In building conditions and in the presence of
interference sources (power lines, transmitters, etc.) the actual range may be smaller.
F&F Filipowski sp. j.
ul. Konstantynowska 79/81, 95-200 Pabianice
tel./fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: fif@fif.com.pl
- 1 -
Wireless system

Advertisement

loading

Summary of Contents for F&F FW-STR1D

  • Page 1 Konstantynowska 79/81, 95-200 Pabianice tel./fax (+48 42) 215 23 83 / (+48 42) 227 09 71 www.fif.com.pl; e-mail: fif@fif.com.pl FW-STR1D Roller-blind controller 230 V AC Do not dispose of this device to thrash with other unsorted waste! In accordan-...
  • Page 2: Features Of The Module

    Installation of this device should be carried out by a qualified installer after reading this manual. Dismantling the casing of the device will au- tomatically void the warranty. Before starting the assembly, make sure that the connecting wires are not live. Conditions of storage, transport and use affect the proper operation of the device.
  • Page 3: Description Of The Device

    Description of the device Connection 1 - power supply L 3 - power supply N 4 - control input triggered with level L or N - direction DOWN 6 - control input triggered with level L or N - direction UP 10 - output - direction DOWN 11 - motor power supply 12 - output - direction UP...
  • Page 4: Load Capacity

    Load capacity The actual maximum load depends on the na- 1.5 A/250 V (AC-3) ture and design of the receiver. For more information visit: www.fif.com.pl. Pairing ① After the device is properly connected, press and hold the PROG button until the relay will switch on and the communication LED will go off.
  • Page 5: Remote Buttons

    The receiver can be paired with eight different transmitters (remote but- tons). Pairing with more buttons will remove the first entries made. Unpairing To clear the list of transmitters cooperating with the receiver, press the PROG button and hold it down for at least 10 seconds.
  • Page 6 Devices of the F&Wave system Transmitters Receivers Box Ø60 DIN rail flush-mounted Single relay FW-R1P FW-R1D FW-RC5 Double relay FW-R2P FW-R2D remote controls Universal dimmer FW-D1P FW-D1D FW-RC4 Roller blind controller FW-STR1P FW-STR1D FW-RC10 Two-channel LED controller FW-LED2P FW-LED2D - 6 -...
  • Page 7: Technical Data

    Technical data power supply 85÷265 V AC control input 85÷265 V AC; <1 mA power consumption operating mode 1.00W standby 0.25 W output load capacity (AC-3) 1.5 A/250V radio frequency 868 MHz working temperature -25-65°C terminal 2.5 mm² screw terminals tightening torque (max) 0.4 Nm mounting...

This manual is also suitable for:

Fw-str1p