Load Capacity - F&F FW-LED2D Manual

Load capacity

2× 6 A/12 V DC
Light bulb or the packaging of the light bulb must be clearly marked with a symbol
or description explicitly indicating that the bulb is designed to work with dimmers.
Pairing
Each channel of the receiver is independently paired.
①
②
Correct pairing will be confirmed by temporary switching off of the output
③
circuit and the LED will turn on again.
The actual maximum load depends on the na-
ture and design of the receiver.
For more information visit: www.fif.com.pl.
After proper connection, press and hold the PROG but-
ton until the circuit of the first channel will switch on and
the communication LED will go off.
To select a second channel for pairing, hold the program-
ming button again until the circuit of the second channel
switches on.
Press the selected button on a remote control or in
a flush-mounted transmitter.
- 4 -