Table of Contents
Advertisement
Data storage
The AirSense 10 device stores patient compliance data such as AHI, Total Hours Used and Leak.
Detailed Data such as snore and pulse rate, as well as high resolution flow and pressure data, are
stored on the SD card.
Data can be transmitted to therapy management software either remotely via cellular
communication, or via SD card. The different ways of transmitting data are detailed in the table
below.
For more information on compliance management with AirView or ResScan, refer to the manuals
supplied with the software.
Type of data
Summary data (compliance data)
Detailed data
High resolution flow and pressure data
(25 Hz)
Detailed data are stored on the SD card and can be viewed on ResScan. Examples of detailed data
available are shown below.
Detailed Data
Parameter
Apnea or hypopnea events
CSR
RERA (AirSense 10 AutoSet for Her only)
Flow limitation (flat to round)
Leak (L/sec)
Minute ventilation (L/min)
Pressure (cm H
O / hPa)
2
Snore (quiet to loud)
Pulse rate (beats/min)—if an oximeter adapter is attached
Oxygen saturation (SpO
)—if an oximeter adapter is attached
2
Software upgrade
The device has a software upgrade feature. When a software upgrade is in progress, the screen will
flash for approximately 10 minutes.
Transmission method
Cellular
SD card to
communication
ResScan
to AirView
SD Card to
AirView
(card-to-
cloud)
Sampling rate
Aperiodic
Aperiodic
Aperiodic
1/2 Hz
1/2 Hz
1/2 Hz
1/2 Hz
1/2 Hz
1 Hz
1 Hz
Sessions stored
365
Limited by usage and
SD card storage
capacity
English
29
Hide quick links:
Advertisement
Table of Contents
