Hartzell HC-B3-2 Series Owner's Manual And Logbook page 8

REVISION 17 HIGHLIGHTS, CONTINUED
• INSTALLATION AND REMOVAL
• Revised the section, "Pre-Installation"
• Added the section, "Propeller Mounting Hardware and
Torque Information"
• Revised Table 3-2, "Torque Table"
• Revised the title of Figure 3-1, "Calculating Torque When
Using a Torquing Wrench Adaptor"
• Revised the title of Figure 3-2, "Torquing Sequence for
Propeller Mounting Bolts/Nuts"
• Revised the section, "Spinner Dome Installation"
• Added Table 3-3, "Spinner Dome and Spinner Cap Mounting
Hardware"
• Revised the section title, "Spinner Removal"
• Revised the section title, "Propeller Removal"
• TESTING AND TROUBLESHOOTING
• Added the section, "Operational Checks"
• Added the section, "Propeller Ice Protection Systems"
• Revised the section, "Hunting and Surging"
• Revised the section, "Failure to Feather (or feathers slowly)"
• Revised the section, "Failure to Unfeather"
• Revised the section, "Vibration"
• Revised the section title, "Propeller Overspeed/Avoidance"
• INSPECTION AND CHECK
• Revised the section, "Pre-Flight Checks"
• Revised the section, "Operational Checks"
• Revised the section, "Required Periodic Inspection/
Maintenance"
• Revised the section, "Inspection Procedures"
• Revised the section, "Special Inspections"
• Revised the section, "Long Term Storage"
REVISION HIGHLIGHTS
Propeller Owner's Manual
139
61-00-39
Page 2
Rev. 17 Apr/20