Hartzell HC-B3-2 Series Owner's Manual And Logbook page 110

CAUTION 1:
CAUTION 2:
CAUTION 3:
Hardware
A flange mounting bolts
F flange mounting bolts
N/P flange mounting bolts
W flange mounting nuts
Spinner mounting bolts
Piston nut (lock nut)
Guide rod jam nuts
Check Nut (beta valve assembly)
* Torque tolerance is ±10% unless otherwise noted.
INSTALLATION AND REMOVAL
Propeller Owner's Manual
FOR A PROPELLER THAT DOES NOT USE A
LUBRICATED (WET) TORQUE, THE MOUNTING
HARDWARE MUST BE CLEAN AND DRY TO
PREVENT EXCESSIVE PRELOAD OF THE
MOUNTING FLANGE.
TORQUE VALUES WITH "WET" NOTED AFTER
THEM ARE BASED ON LUBRICATED THREADS
WITH APPROVED ANTI-SEIZE COMPOUND
MIL-PRF-83483( ).
REFER TO FIGURE 3-1 FOR TORQUE READING
WHEN USING A TORQUE WRENCH ADAPTER.
Torque Table
Table 3-2
139
Torque
100-105 Ft-Lbs (136-142 N•m) wet
80-90 Ft-Lbs (108-122 N•m)
100-105 Ft-Lbs (136-142 N•m) wet
120-125 Ft-Lbs (163-170 N•m)
30-40 Ft-Lbs (41-54 N•m)
120 Ft-Lbs (163 N•m)*
10 Ft-Lbs (14 N•m)*
9-11 Ft-Lbs (12-15 N•m)
61-00-39
Page 3-10
Rev. 17 Apr/20