Yale Quattro Sliding 3 Installation Instructions

1
INSTALLATION INSTRUCTIONS
'O' Ring
Locating
Lugs
4
'O' Ring
Ensure Actuating bar
and Rods are assembled
as shown prior to assembly
to the door frame. With
the 'TOP' mark facing the
top of the door.
5
Keeping the Locating Lugs
of the Actuating bar facing
the front edge of the stile,
insert the rod assembly
6
through the top cut-out, and
slide it through the door
section. With the Top lock in
the locked position, connect
the rod and push into place.
Pull bottom rod end through
bottom cut-out. Connect to
Bottom Lock, and push
into place.
1a
Mounting of the Handle below the centreline
Both sides of the door stile must be cut out to the
dimensions given. Start with the centreline of the door.
Top Lock
Locating
Lugs
Actuating
Bar
Rod
Bottom
Lock
1b
Mounting of the Handle above the centreline
Both sides of the door stile must be cut out to
the dimensions given. Start with the centreline
of the door.
11