Advantech FWA-1012VC User Manual page 36

The settings for COM0 console can be accessed in this menu.
This sub menu allows you to change the settings used for the serial console. For example, users can define
the terminal type, bits per second, data bits, parity, stop bits and others.
Setup item
Console Redirection
Serial Console Port
Serial Console
Speed
Data Bits
Stop Bits
Parity
Flow Control
Terminal Type
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Figure 19: Platform Setup: Console Redirection Menu
Access / Options
Disabled /
Disabled / Enabled Console Redirection
Enabled
COM0 Serial Console Port
9600 / 19200 / Defines the baud rate.
38400 / 57600 /
115200
7 / 8 Defines number of data bits in a character.
1 / 2 Defines number of stop bits in a character.
None / Even / Odd
Defines the parity scheme used.
/ Mark / Space
None / Xon/Xoff Defines the flow control scheme.
ANSI / VT100 / Select the target terminal emulation type:‐ ANSI to use the
VT100+ / Extended ASCII Character Set.
Description
Page 36