CE Notification The FWA-3180, developed by Advantech Co., Ltd., has passed the CE test for environment specifications when shielded cables are used for external wiring. We recommend the use of shielded cables.
Product warranty Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two year from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation.
If any of these items are missing or damaged, contact your distributor or sales representative immediately. Technical Support and Sales Assistance If you have any technical questions about the FWA-3180 or any other Advantech products, please visit our support website at: •...
A . 1 N A M E - 3 1 8 0 M o t h e r B o a r d ..........1 6 FWA-3180 User Manual --- Page...
Page 6
Figures Figure 1-1: FWA-3180 dimensions..............4 Figure 1-2: Outlook of FWA-3180................. 4 Figure 2-1: Front view of FWA-3180............7 Figure 2-2: Removing the cover............. 7 Figure 2-3: Top view of FWA-3180............8 Figure 2-4: Installing Central Processing Unit steps........9 Figure 2-5: Installing Memory Module steps..........
Indicators which monitor power and HDD activities. For easy access, the front panel has a 9-pin, RS-232 serial port for local system management, maintenance and diagnostics. The FWA-3180 provides optional 3.5” IDE HDD and one PCI slot. It is FCC and CE compliant. Please see the FWA-3180 user manual for more details.
Page 9
Non-Operating: Temperature -20 ~ 75 °C (-4 ~ 167 °F), Humidity 5 ~ 95 % • Dimensions (W x H x D): 1U: 426 x 44.4 x 380 mm (16.7” x 1.7” x 14.9”) • Weight: 4.5 Kg (9.9 lb) FWA-3180 User Manual --- Page...
Before you begin, you should also gather together all of the device you plan to install, as well as the CPU, RAM, HDD, and etc. The front panel of FWA-3180 includes a LCD display module, eight LAN ports, a RS-232 console port, and two LEDs where one is power LED and another is HDD LED.
3.5” HDD Space One PCI slot One PCI slot Figure 2-3: Top view of FWA-3180 2.2 Installing Central Processing Unit (CPU) 1. Locate the 478-pin CPU ZIF socket on the motherboard. And pull the Socket actuation lever to the 90-degree directly.
1. Unlock a DIMM socket by. Align the notch of the DIMM memory module to match on the socket and insert the DIMM into the socket until the DIMM is properly seated. 2. Press the retaining clips inward to lock the DIMM memory module. Installing memory module is completed. FWA-3180 User Manual --- Page...
4. Connect the IDE cable included in the accessory box to the connector on the HDD. Make sure that the RED wire on the ribbon should be connected to PIN 1 of HDD. 5. Connect power connector to the HDD. Installing Hard Disk Drive is completed. FWA-3180 User Manual --- Page 10...
1. 1. 2. 2. Figure 2-6: Installing Hard Disk Drive steps 2.5 Installing Compact Flash 1. Position a CompactFlash disk accordingly in the CompactFlash disk socket and push it inward. Installing CompactFlash disk is completed. FWA-3180 User Manual --- Page 11...
1. 1. 1. Figure 2-7: Installing Compact Flash steps 2.6 Setting LAN Bypass function FWA-3180 provides LAN Bypass function showed as Figure 2-8. When system shuts down, LAN1-LAN2, LAN3-LAN4, LAN5-LAN6, LAN7-LAN8 will connect directly to avoid network broken. Network appliance...
Page 19
When jumper keeps on pins 4-6, follow below steps to set LAN Bypass function via BIOS. 1. Turn on FWA-3180 platform. Then hold down the <Delete> key during the boot process to enter BIOS menu. 2. Move to "LAN Bypass Control" Item 3.
Page 22
AUTO ON AUTO ON (Default) (Default) (Default) (Default) PS-ON PS-ON LAN Bypass LAN Bypass GPIO GPIO Control Control 5V (-) 5V (-) LAN Bypass LAN Bypass 5V (+) 5V (+) 5V (+) 5V (+) FWA-3180 User Manual --- Page 16...