Related Manuals for Advantech FWA-3140
Summary of Contents for Advantech FWA-3140
- Page 1 FWA-3140 Rackmount Internet Security Platform with 4 Front LAN Ports/ Dual PCI Expansion Slots/ LCD Display Advantech Internet Security Platform...
-
Page 2: Copyright Notice
CE Notification The FWA-3140, developed by Advantech Co., Ltd., has passed the CE test for environment specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. -
Page 3: Product Warranty
Product warranty Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two year from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. -
Page 4: Packing List
If any of these items are missing or damaged, contact your distributor or sales representative immediately. Technical Support and Sales Assistance If you have any technical questions about the FWA-3140 or any other Advantech products, please visit our support website at: •... -
Page 5: Table Of Contents
A . 1 N A M E - 3 1 4 0 M o t h e r B o a r d ..........1 6 FWA-3140 User Manual --- Page... - Page 6 Figures Figure 1-1: FWA-3140 dimensions..............4 Figure 1-2: Outlook of FWA-3140................. 4 Figure 2-1: Front view of FWA-3140............7 Figure 2-2: Removing the cover............. 7 Figure 2-3: Top view of FWA-3140............8 Figure 2-4: Installing Central Processing Unit steps........9 Figure 2-5: Installing Memory Module steps..........
-
Page 7: General Information
General Information FWA-3140 User Manual --- Page... -
Page 8: Introduction
Indicators which monitor power and HDD activities. For easy access, the front panel has a 9-pin, RS-232 serial port for local system management, maintenance and diagnostics. The FWA-3140 provides optional 3.5” IDE HDD and 2 PCI slots. It is FCC and CE compliant. Please see the FWA-3140 user manual for more details. - Page 9 Non-Operating: Temperature -20 ~ 75 °C (-4 ~ 167 °F), Humidity 5 ~ 95 % • Dimensions (W x H x D): 1U: 426 x 44.4 x 360 mm (16.7” x 1.7” x 15.7”) • Weight: 4.5 Kg (9.9 lb) FWA-3140 User Manual --- Page...
-
Page 10: Dimensions
1.4 Dimensions Figure 1-1: FWA-3140 dimensions. Figure 1-2: Outlook of FWA-3140 FWA-3140 User Manual --- Page... -
Page 11: Model List
1.5 Model List • FWA-3140 A: 1U rackmount Internet security platform, Dual 32-bit/33 MHz PCI expansion slots, LCD display module, Four 10/100 Fast Ethernet ports supporting one LAN Bypass function. • FWA-3140 B: 1U rackmount Internet security platform, Dual 32-bit/33 MHz PCI expansion slots, LCD display module, two 10/100 Fast Ethernet and two 10/100/1000 Gigabit Ethernet ports supporting one LAN Bypass function. -
Page 12: System Setup
System Setup FWA-3140 User Manual --- Page... -
Page 13: Removing The Cover
Before you begin, you should also gather together all of the device you plan to install, as well as the CPU, RAM, HDD, and etc. The front panel of FWA-3140 includes a LCD display module, four Ethernet ports, a RS-232 console port, and two LEDs where one is power LED and another is HDD LED. -
Page 14: Installing Central Processing Unit (Cpu)
3.5” HDD Space Two PCI slot Two PCI slot Figure 2-3: Top view of FWA-3140 2.2 Installing Central Processing Unit (CPU) 1. Locate the 478-pin CPU ZIF socket on the motherboard. And pull the Socket actuation lever to the 90-degree directly. -
Page 15: Installing Memory Module
FSB 400 Pentium 4 processor will only support DDR266 memory module. 1. Unlock a DIMM socket by. Align the notch of the DIMM memory module to match on the socket and insert the DIMM into the socket until the DIMM is properly seated. FWA-3140 User Manual --- Page... -
Page 16: Installing Hard Drive
4. Connect the IDE cable included in the accessory box to the connector on the HDD. Make sure that the RED wire on the ribbon should be connected to PIN 1 of HDD. 5. Connect power connector to the HDD. Installing Hard Disk Drive is completed. FWA-3140 User Manual --- Page 10... -
Page 17: I N S T A L L I N G C O M P A C T F L A S
1. 1. 2. 2. Figure 2-6: Installing Hard Disk Drive steps 2.5 Installing Compact Flash 1. Position a CompactFlash disk accordingly in the CompactFlash disk socket and push it inward. Installing CompactFlash disk is completed. FWA-3140 User Manual --- Page 11... -
Page 18: Setting Lan Bypass Function
1. 1. 1. Figure 2-7: Installing Compact Flash steps 2.6 Setting LAN Bypass function FWA-3140 provides LAN Bypass function showed as Figure 2-8. When system shuts down, LAN1-LAN2 will connect directly to avoid network broken. Network appliance Network appliance Network appliance... -
Page 19: Appendix A
When jumper keeps on pins 4-6, follow below steps to set LAN Bypass function via BIOS. 1. Turn on FWA-3140 platform. Then hold down the <Delete> key during the boot process to enter BIOS menu. 2. Move to "LAN Bypass Control" Item 3. - Page 20 Figure 2-10: Setting LAN Bypass function from BIOS FWA-3140 User Manual --- Page 14...
-
Page 21: Pin Assignments
Pin Assignments APPENDIX FWA-3140 User Manual --- Page 15... - Page 22 A.1 NAME-3140 Mother Board 1. CONNECTORS FWA-3140 User Manual --- Page 16...
- Page 23 2. PIN ASSIGNMENTS FWA-3140 User Manual --- Page 17...