Hitachi MICRO-EHV+ Applications Manual page 21

(2) DC output (Output 0 to 3 on MV-D64DT, MV-D40DT, MV-D20DT)
Item
Output specifications
Rated load voltage
Minimum switching current
Leak current
Maximum 1 circuit
Load current
1 common
OFF → ON
Output
ON → OFF
response time
Number of outputs
Common
Surge removing circuit
Fuse
Insulation system
Output display
External connection
Externally supplied power *
Insulation
Output voltage drop
*: It is required to supply 12 to 30V DC between the V and C terminal externally.
(3) DC output (Output 4 and over on MV-D64DT, MV-D40DT, MV-D20DT)
Item
Output specifications
Rated load voltage
Minimum switching current
Leak current
1 circuit
Maximum
Load current 1 common
OFF → ON
Output
ON → OFF
response time
Number of outputs
Common
Surge removing circuit
Fuse
Insulation system
Output display
External connection
Externally supplied power *
Insulation
Output voltage drop
*: It is required to supply 12 to 30V DC between the V and C terminal externally.
Specifications
Transistor output (sink type)
24 / 12 V DC (+10%, -15%)
10 mA
0.1 mA (max.)
0.5 A 24VDC, 0.3 A 12VDC
2 A
5 μs (max.) 24 V DC 0.2 A
5 μs (max.) 24 V DC 0.2 A
4
1
None
None
Photocoupler insulation
LED indication
Removable type screw terminal block (M3)
12 to 30 V DC
1,500 V or more (external-internal)
500 V or more (external-external)
0.3 V DC (max.)
Specifications
Transistor output (sink type)
24 / 12 V DC (+10%, -15%)
10 mA
0.1 mA (max.)
0.5 A
64-point type: 3 A
20/40-point type: 5 A
0.1 ms (max.) 24 V DC
0.1 ms (max.) 24 V DC
64-point type: 20
40-point type: 12
20-point type: 4
64-point type: 3
20/40-point type: 1
None
None
Photocoupler insulation
LED indication
Removable type screw terminal block (M3)
12 to 30 V DC
1,500 V or more (external-internal)
500 V or more (external-external)
0.3 V DC (max.)
2 – 9
Chapter 2 Specifications
Internal circuit diagram
V10
0
C10
Internal circuit diagram
V
4
C