ATEN Master View CS-138A User Manual page 15

Note: 1) On a daisy chained installation, you must press the Port Selection
switch on the Master View Station that connects directly to the
PC you want to access.
2) Simultaneously pressing Port Selection buttons 7 and 8 on the
First Stage unit initiates the CS-138A's Quick View Scan feature,
in which all the ports currently selected for Quick View scanning
with the OSD function are cycled through. The length of time
spent on each port is determined with the OSD's F6 SET function
(see the OSD Operation section for details).
w w Hot Key Navigation
Hotkey navigation allows you to conveniently access connected PCs directly
from the keyboard, instead of having to manually select them by pressing
Port Selection switches. To select a port with the Hotkey method, do the
following:
1. Press [Ctrl+Alt+Shift] to invoke the hotkey function.
2. Key in the Port ID number (see Port ID Numbering, below), then press
[Enter].
Note: After invoking the hotkey function with the [Ctrl+Alt+Shift]
combination, you must key in the Port ID and press [Enter] within
1 second for each keypress.
w w OSD
The OSD feature is invoked with a hotkey. To enter the OSD Main Menu,
press the Ctrl key twice ([Ctrl] [Ctrl]). You can use either the left or right
Ctrl keys, but they must both be on the same side (both left, or both right).
Note: You can optionally change the hotkey to the Scroll Lock key (see F6,
below), in which case you would press [Scroll Lock] [Scroll Lock].
From there, either:
Invoke the Hotkey function with [Ctrl+Alt+Shift]; key in the Port ID (see
Port ID Numbering, below, for details); then press [Enter], or
Navigate with the Arrow Keys to move the Highlight Bar to the port you
want; then press [Enter].
- 13 -