Table of Contents
Advertisement
Setting
SET PASSWORD
CLEAR THE NAME
LIST*
RESTORE DEFAULT
VALUES*
LOCK CONSOLE*
* If a password has been set, this setting requires you to supply it in order
to access them. See the OSD Security section, below, for details.
CS-128A User Manual
Allows you to set a password in order to control access to:
Clearing the Name List; Restoring Default Values; and
Locking/Unlocking the Console. See the OSD Security
Features section, below, for password setting details.
Clears all Port Names from the Name List. You are asked to
confirm before the procedure goes on. Key in Y, then press
[Enter] to confirm. While the names are being cleared, a
message appears on the display to indicate so. After the
names have been cleared, another message appears to
indicate that the procedure completed successfully.
Clears all settings from memory, and returns the unit to the
factory defaults. You are asked to confirm before the
procedure goes on. Key in Y, then press [Enter] to confirm.
While the settings are being cleared, a message appears
on the display to indicate so. After the settings have been
cleared, another message appears to indicate that the
procedure completed successfully.
Locks / Unlocks the Console. When the Console is locked,
only the current monitor screen displays. Attempts to input
information from the console have no effect; attempts to
switch to a different port, either from the Console or by
pressing the manual switches, have no effect either. The
only way to regain access to the computers is by Unlocking
the Console. If a password has been set, you must provide
the password in order to Lock / Unlock the Console. If no
password has been set, pressing [Enter] will Lock / Unlock
the Console.
Function
21
Advertisement
Table of Contents
