ramia PRO-AS Assembly Instruction

A1-26pcs A2-8pcs B1-4pcs
10x40 mm 8X40mm 5x100mm
H-2pcs 2+2pcs
Wedge for
Attention:
tool well
Ø 19 mm
Workbench is made from high quality beech wood guaranteeing maximum resistance and long service life
of the bench.
NOTICE:
•The bench must not be left in damp or humid conditions which will cause movement in the wood. •The bench must not be left in damp or humid conditions which will cause movement in the wood.
Recommended humidity level max. 60%.
•If you bought workbench without surface treatment, we recommend you to finish the bench by colourless
varnish or oil including the bottom of workbench. Varnish (oil) prevents absorption of surrounding moisture.
Don´t forget to repeat surface treatment each 6 months
•To increase the stability of your workbench we recommend you to bolt the bench to the floor.
•Each 6 months tighten all screws and bolts
Parts
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz
Assembly Instruction - PRO-AS
B2-4pcs B3-2pcs
5x90mm 4x40mm
.
Packing 1 Packing 2
B4-3pcs C-4pcs D1-4pcs
6x40mm M12x100 M12
Date
D2-4pcs E-4pcs F-1pcs
M12 M12
G-1pcs