ramia HB-DIY1500 Assembly Instructions Manual

A1-38pcs B1-20pcs
10x40 mm 7x60 mm
2pcs
Attention:
Workbench is made from high quality beech wood guaranteeing maximum resistance and long service life of the
bench.
Your workbench has NO TREATMENT. Please treat your bench with a varnish or oil within 3 months of
assembly.
Don´t forget to repeat surface treatment each 6 months. This is especially important if situated in an unheated
workshop , garage or outbilding.
To increase the rigidity of your workbench ensure that you glue the joints and bolt the bench in possiton .
Wood is and natural product, check and tighten all screws and bolts every six monhts.
NOTICE: Like all solid wood products it must not be left in areas of high humidity or damp that will cause natural
movement.
Parts
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz
Assembly Instructions HB-DIY1500
B2-8pcs B3-4pcs B4-4pcs
6x30 mm 6x40 mm 5x50 mm
4pcs
Packing 1
C1-4pcs D1-4pcs
M12x100 M 12
1pc
Allen key
Packing 2
D2-4pcs E-4pcs F-1pcs
M 12 M 12
1pc
Sandpaper
for edges
abrading
Date