ramia PRO-APS 2100 Assembly Instructions

A1-18pcs A2-8pcs B1-4pcs
10x40 mm 8X40mm 5x100mm
2+2pcs
Ø 19mm
Attention:
Workbench is made of high quality beech wood guaranteeing maximum resistance and long service life of the bench.
Like all solid wood products it must not be left in areas of high humidity or damp that will cause natural movement.
Recommended humidity level max. 60%.
Your workbench (bench top) was lightly treated by varnish to protect the bench during shipping and storring. We recommend
you to treat your bench by colourless varnish or oil including the bottom of workbench within 4 weeks after assembly.
Varnish (oil) prevents absorption of surrounding moisture. Don´t forget to repeat surface treatment each year. If you prefer to
use oil or Wood wax, we recommend to regrind the bench top.
To increase the rigidity of your workbench ensure that you glue the joints and bolt the bench in possiton.
Wood is and natural product, check and tighten all screws and bolts every 6 monhts.
Recommendation: Use your own proven glue to assemble the workbench. The supplied glue only works properly in
suitable conditions.
Warning: Very heavy item (over 310lbs) - Assembly by 2 persons at least
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz
Assembly Instructions PRO-APS 2100
B2-4pcs B3-2pcs C-8pcs
5x90mm 4x40mm M12x140
D1-8pcs D2-8pcs E-8pcs
M12 M12
M12
F-1pcs G-1pcs H-2pcs
Wedge for
tool well