Advertisement
2) Drawer assembly
!!! HINT !!! - don´t fill up holes for dowels by glue. Smear dowels by glue and instert them into the holes.
3) Bench top and drawer attaching
Important! Wedges for tool well are supplied separately (part H). Producer recommends to add wedges after
approx. 4 weeks. Workbench needs to adapt to surrounding conditions.
In case of need adjust the size of wedges by size of tool well.
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz
Advertisement
