ramia PRO-AN Assembly Instructions

Assembly Instructions - PRO-AN
A1-30pcs A2-8pcs B1-4pcs B2-4pcs B3-2pcs B4-6pcs B5-8pcs C-4pcs D1-4pcs D2-4pcs E-4pcs F-1pc
10x40mm 8x40mm 5x100mm 5x90mm 4x40mm 6x40mm 8x45mm M12x100 M12 M12 M12
G-1pc 2+2pcs
Attention:
Ø 19 mm
Workbench is made from high quality beech wood guaranteeing maximum resistance and long service life
of the bench.
NOTICE:
•The bench must not be left in damp or humid conditions which will cause movement in the wood.
Recommended humidity level max. 60%. Recommended humidity level max. 60%.
•If you bought workbench without surface treatment, we recommend you to finish the bench by colourless
varnish or oil including the bottom of workbench. Varnish (oil) prevents absorption of surrounding moisture.
Don´t forget to repeat surface treatment each 6 months including holes for bench dogs.
•To increase the stability of your workbench we recommend you to bolt the bench to the floor.
•Each 6 months tighten all screws and bolts
.

Parts

Packing 1 Packing 2 Date
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz