ramia HB-N1500 Assembly Instructions Manual

ramia HB-N1500 Assembly Instructions Manual

Hide thumbs Also See for HB-N1500:

Advertisement

Available languages

Available languages

Assembly Instructions, Montageanleitung, Montážní návod
HB-N1500, HB-N1700, HB-N2000
Attention/Achtung/Pozor:
CZ
Výrobek je zhotoven z velice kvalitní bukové spárovky, která zaručuje dlouhou životnost a užitnou hodnotu.
UPOZORNĚNÍ: Výrobek nesmí být vystaven dlouhodobému přímému působení vody či zvýšené vlhkosti, která může způsobit
rozpínavost použitého dřeva. Doporučena vlhkost maximálně 60 %.
DOPORUČENÍ:
Výrobek umístit na místo s relativně stálou vlhkostí maximálně 60%.
Pokud jste si objednali hoblici bez povrchové úpravy, doporučujeme hoblici natřít bezbarvým lakem, včetně spodku. Lak zamezí
absorbování okolní vlhkosti. Povrchovou úpravu opakujte alespoň 1x ročně
Pro zvýšení stability ukotvěte hoblici k podlaze.
Minimálně jednou za 6 měsíců, utáhnout veškeré šroubové spoje.
ENG
Workbench is made of high quality beech wood guaranteeing maximum resistance and long service life.
NOTICE:
The bench must not be left in damp or humid conditions which will cause movement in the wood. Recommended humidity
level max. 60%.
If you bought workbench without surface treatment, we recommend you to finish the bench by colourless varnish or oil
including the bottom of workbench. Varnish (oil) prevents absorption of surrounding moisture. Don´t forget to repeat surface
treatment each year including holes for bench dogs.
To increase the stability of your workbench we recommend you to bolt the bench to the floor.
Each 6 months tighten all screws and bolts.
D
Information - Die Hobelbank ist aus hochwertigem Buchenholz hergestellt. Maximale Beständigkeit und lange Lebensdauer ist
garantiert.
Bitte die folgenden Punkte beachten:
Die Hobelbank nicht in feuchter Umgebung benutzen. Empfohlene Luftfeuchtigkeit max. 60%.
Wenn Sie die Hobelbank ohne Oberflächenversiegelung gekauft haben, empfiehlt es sich, die Bank mit farblosem Lack oder Öl
zu lackieren. Das verhindert das Eindringen von Feuchtigkeit. Den Vorgang bitte alle 6 Monate wiederholen.
Um die Stabilität der Hobelbank zu erhöhen empfiehlt es sich, die Bank auf dem Boden festzuschrauben. Alle 6 Monate bitte
alle Schrauben nachziehen.

Parts

Packing 1
Packing 2
Date
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HB-N1500 and is the answer not in the manual?

Questions and answers

Summary of Contents for ramia HB-N1500

  • Page 1 Um die Stabilität der Hobelbank zu erhöhen empfiehlt es sich, die Bank auf dem Boden festzuschrauben. Alle 6 Monate bitte alle Schrauben nachziehen. Parts Packing 1 Packing 2 Date Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz...
  • Page 2 !!! POZOR !!! Při nákupu hoblice se skříňkou na nářadí si nejprve prohledněte návod skříňky pod hoblici. Montáž podnoží se v případě použití skříňky liší. Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz...
  • Page 3 Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz...
  • Page 4 !!! ATTENTION !!! When buying this workbench with a cabinet, first check the cabinet instructions. The assembly of the base is different when the cabinet is used. Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz...
  • Page 5 Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz...
  • Page 6 !!! BEACHTUNG !!! Wenn Sie diese Werkbank mit einem Schrank kaufen, prüfen Sie zuerst die Anweisungen des Schrankes. Die Montage der Basis unterscheidet sich, wenn der Schrank verwendet wird. Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz...
  • Page 7 Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz...

This manual is also suitable for:

Hb-n1700Hb-n2000

Table of Contents