Parking, Transport And Storage; Maintenance - Miele SGDE0 Operating Instructions Manual

Illuminating the work area (Fig. 30)
(for models with the LED handle)
Your vacuum cleaner is equipped with
an LED on the handle to illuminate the
work area.
 Press the  button on the LED han-
dle.
The lighting will switch itself off auto-
matically after approx. 30 seconds.

Parking, transport and storage

Park system for pauses during
vacu-uming (Fig. 31)
(cannot be used with Electrobrushes
SEB 228 and SEB 236)
The park system allows you to conve-
niently park the suction wand and floor-
head during pauses.
 Slot the floorhead into the parking at-
tachment on the vacuum cleaner.
If your vacuum cleaner is on a slop-
ing surface, e.g., a ramp, retract the
telescopic suction wand fully.
Park system On/Off switch
Some models are fitted with an On/Off
switch in the park system.
The vacuum cleaner switches off auto-
matically when the floorhead is slotted
into the park system with the park at-
tachment. When the floorhead is re-
moved the vacuum cleaner will switch
back on automatically and will operate
with the previously selected setting.
Park system for storage (Fig. 32)

Always disconnect the vacuum
cleaner from the power supply when
you have finished using it. Remove
the plug from the outlet.
If your vacuum cleaner is equipped with
a lit park system for storage, it switches
off about 30 seconds after being dis-
connected from the power supply.
 Stand the vacuum cleaner upright.
It is a good idea to retract the tele-
scopic suction wand fully.
 Slot the floorhead downwards into
one of the parking attachments on ei-
ther side of the vacuum cleaner (the
parking attachments cannot be used
with Electrobrushes SEB 236 and).
This makes the vacuum cleaner easier
to carry or store.

Maintenance


Always switch off the vacuum
cleaner for maintenance work and
remove the plug from the outlet.
The Miele filtration system consists of
three components:
en-US
19