Advertisement
7
Install the slide rail assemblies
If you do not have enough space around your rack to open the front and back doors
completely, remove the doors before starting this task to allow adequate access.
If you are installing your server using fixed rails, go to task 4 Install the fixed rail assemblies.
Locate the rack-mounting hardware kit, the cable-management arm, and the slide
7.1
rail assemblies that were included with your server.
Determine where in the rack to place the server. Remove any filler panels
7.2
necessary to allow adequate access to the location where you will install your
server.
Insert the right slide rail
7.3
the rail pins protruding through the flange.
Press on the end of the slide rail
7.4
and insert the slide rail into the front-right rack mounting flange
7.5
Repeat steps 7 .3 and 7 .4 for the left slide rail.
A
into the back-right rack mounting flange
A
A
to compress the spring-loaded mechanism,
B
B
B
holes.
holes, with
Advertisement
