IBM System p5 505 Quick Start Manual page 13

9
Install the cable-management arm
Align the tabs
9.1
the back of the server. Slide the mounting plate
Tighten the thumbscrew
Slide the left hinge brackets
9.2
that you installed in step 7 .7 and the mounting bracket
arm mounting plate until the hinge brackets snap into place.
A
on the cable-management arm mounting plate
C
to secure the mounting plate to the server.
C
B
A
E F
D
B
D
onto the cable-management arm mounting bracket
B
with the slots on
to the left to engage the tabs.
F
on the cable-management
E