StarTech.com DKT31CHDVCM Quick Start Manual

USB-C™ 10Gbps Single Monitor Mini Docking Station with HDMI, DP, or VGA | PD | 24cm Wrap Around Cable

Product Diagram (DKT31CHDVCM)

1
2
3
Component
•
1 RJ45 Port
•
2
DisplayPort Port
•
3 HDMI Port
•
4 VGA Port
•
•
5 USB-A Port x 2
•
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
4 5 6
Function
Used to connect the Docking Station to a
Network Device.
Used to connect a Display Device to the
Docking Station.
Note: The connected Host Laptop must be
enabled with DP ALT Mode.
Used to connect a Display Device to the
Docking Station.
Note: The connected Host Laptop must be
enabled with DP ALT Mode.
Used to connect a Display Device to the
Docking Station.
Note: The connected Host Laptop must be
enabled with DP ALT Mode.
Used to connect a USB Peripheral Device to
the Docking Station.
Allows you to fast-charge devices that comply
with USB Battery Charging specification
Revision 1.2.
Supports up to 5V at 1.5A, 7.5W charging.
6 USB-C Port
7 USB-C Connector

Requirements

For the latest requirements, please visit
Host
7
A Laptop with USB-C or Thunderbolt 3 port and with DP ALT Mode enabled x 1
•
Display
VGA, HDMI, or DisplayPort compatible x 1
•
Cables (depends on configuration)
VGA Cable x 1
•
HDMI Cable x 1
•
DisplayPort Cable x 1
•
CAT5e/6 Cable x 1
•

Powering the Docking Station

Unravel the Wrap Around Cable from the Docking Station Housing, by holding
1.
onto the USB-C Connector and gently pulling the cable outward, away from the
Docking Station Housing.
Connect the USB-C Connector to a USB-C or Thunderbolt 3 port on the Host
2.
Laptop.

Connecting a Display to the Docking Station

When more than one Display is connected to the Docking Station, the first Display
that was connected will be the active Display until the Display is disconnected from
the Docking Station. The priority when you have three monitors connected to the
Docking Station is as follows: DisplayPort -> HDMI -> VGA.
DisplayPort
Connect a DisplayPort Cable (sold separately) to the DisplayPort Port on the
•
Docking Station and the other end to a DisplayPort port on a Display Device.
HDMI
Quick-Start Guide
Used to connect a USB Peripheral Device to
•
the Docking Station.
Supports up to 5V at 1.5A, 7.5W charging.
•
Can also be used for PD Pass Through.
•
Used to connect the Docking Station to a
•
Host Laptop.
www.startech.com/DKT31CHDVCM
Manual Revision: March 5, 2020 12:26 PM