Auto Power Off - Fluke 106 User Manual

106/107
Users Manual
Item








Auto Power Off

The Product automatically powers off after 20 minutes of inactivity.
To restart the Product, turn the rotary switch back to the OFF position and then to a
necessary position.
To disable the Auto Power Off function, hold down the YELLOW button when turning on the
Product, until PoFF shows on the display.
10
Shop for Fluke products online at:
Table 2. Display
Description
High voltage
Display Hold is enabled
Continuity selected
Diode test is selected
Duty Cycle is selected
Decimal prefix
Ohms is selected
MyFlukeStore
www.
Item Description
Frequency is selected

 Farads
Millivolts

Amps or volts

Dc or ac voltage or current

Auto Range mode is enabled

 Low battery. Replace battery.
.com
1.888.610.7664