Table of Contents
Advertisement
Quick Links
Operation Manual
Air Compressor
61016
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Table of Contents
Related Manuals for WilTec 61016
Summary of Contents for WilTec 61016
- Page 1 Operation Manual Air Compressor 61016 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
-
Page 3: Important Note
This does not affect your air com- pressor, but may affect the equipment being used. Never directly inhale the compressed air produced by a compressor. It is not suitable for breathing purposes. © by WilTec Wildanger Technik GmbH Item 61016 Page 3 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de... -
Page 4: Brief Description
© by WilTec Wildanger Technik GmbH Item 61016 Page 4 http://www.WilTec.de... -
Page 5: Technical Parameters
Open the outlet valve, set the pressure switch knob in the on position (fig.2), let the compressor run for 10 minutes without load to ensure the moving parts to be lubric- ated before regular operation. © by WilTec Wildanger Technik GmbH Item 61016 Page 5 http://www.WilTec.de http://www.aoyue.eu... -
Page 6: Operation And Adjustment
The lubricating oil must be clean, and the oil level should be kept on the red circle level. • Disconnect the plug to cut the power supply off and open the outlet valve afterwards. • © by WilTec Wildanger Technik GmbH Item 61016 Page 6 http://www.WilTec.de http://www.aoyue.eu... -
Page 7: Maintenance
Open the drain cock under the tank to exhaust any condensate after every 60 working hours. Clean crankcase after every 120 working hours and renew the oil, clean the air filter and check the safety valve and the pressure gauge. © by WilTec Wildanger Technik GmbH Item 61016 Page 7 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de... -
Page 8: Problems And Solutions
Valve plate damaged, carbon Replace and clean build up or stuck Piston ring and cylinder worn Repair or replace of damaged © by WilTec Wildanger Technik GmbH Item 61016 Page 8 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de... -
Page 9: Exploded View
Exploded view © by WilTec Wildanger Technik GmbH Item 61016 Page 9 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de... -
Page 10: Parts List
Bolt M8×25 Crank case Washer foot Motor Washer 8 Sealing ring Nut 8 Bearing 6204RS Drain cock Bearing 6202RS Wheel Corrugated washer Cover piece Motor bracket © by WilTec Wildanger Technik GmbH Item 61016 Page 10 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de... -
Page 11: Disposal Regulations
All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste. -
Page 12: Eg-Konformitätserklärung
EN ISO 12100 :2010, EN 1012-1 :2010 EN 60204-1 :2006+A1 :2009+AC :2010 EN 61000-6-1 :2007, EN 61000-6-3 :2007+A1 :2011+AC :2012 EN 61000-3-2 :2014, EN 61000-3-3 :2013 Bevollmächtigter für die Zusammenstellung der technischen Unterlagen: Bernd Wildanger, Geschäftsführer WilTec Wildanger Technik GmbH Königsbenden 12 52249 Eschweiler Deutschland Eschweiler, 06. Juni 2016 Gültig bis 05. Juni 2021...