Advertisement
Table of Contents
Operation Instructions
Airbrush Compressor AS186
ARTICLE 34208
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH
Seite 1
http://www.wiltec.info
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for WilTec AS186
Summary of Contents for WilTec AS186
-
Page 1: Operation Instructions
Technical changes reserved! Due to further developments illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 1 http://www.wiltec.info... - Page 2 The user is responsible for complying with the location specific safety and mounting regulations (you can ask an electrician) • In case of device failure the repairs can be carried out only by an electrician or by the WilTec- repair service © by WilTec Wildanger Technik GmbH Seite 2 http://www.wiltec.info...
-
Page 3: Safety Guidelines
4. With water filter, pressure setting and manometer 1. Automatic start without counter pressure extends the stability of the engine. 2. Overtemperature protection 3. Safety device for the air tank 4. Very low noise level © by WilTec Wildanger Technik GmbH Seite 3 http://www.wiltec.info... -
Page 4: User Notes
4. The lifetime of the compressor motor extends itself because the motor runs only when the tank requires it instead of always being turned on. 5. Tanks are generally the first moisture traps. © by WilTec Wildanger Technik GmbH Seite 4 http://www.wiltec.info... - Page 5 4. Do not rotate the knob against high resistance. If necessary the height and the position of the of the knob can vary slightly. 5. For emptying the condensed water collector use the water drain plug. Assembly Switch Pressure regulator Manometer Air connection Air filter Mains plug © by WilTec Wildanger Technik GmbH Seite 5 http://www.wiltec.info...
- Page 6 Parts list © by WilTec Wildanger Technik GmbH Seite 6 http://www.wiltec.info...
- Page 7 PIPE NUT AS186--#21 FRONT GASKET AS186--#47 PLUG AS186--#22 FRONT COVER AS186--#48 SAFETY VALVE AS186--#23 FILTER AS186--#49 ADAPTER AS186--#24 O-RING AS186--#50 SCREW AS186--#25 CYLINDER BLCCK AS186--#51 DRAIN VALVE AS186--#26 O-RING AS186--#52 MUFFLE © by WilTec Wildanger Technik GmbH Seite 7 http://www.wiltec.info...
- Page 8 All Wiltec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.
-
Page 9: Ec Declaration Of Conformity
When evaluating the product according to the EU demands, the following standards were applied: EN 60335-1:2002 EN 60335-2-34:2002 If the product is changed this declaration loses its validity. Eschweiler, 06.Juni 2006 __________________________ Bernd Wildanger Manager © by WilTec Wildanger Technik GmbH Seite 9 http://www.wiltec.info...
Need help?
Do you have a question about the AS186 and is the answer not in the manual?
Questions and answers