Advertisement
Quick Links
Instructions for Use
Airbrush Compressor TC-25T
ARTICLE 34205
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH
Seite 10
http://www.wiltec.info
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for WilTec TC-25T
Summary of Contents for WilTec TC-25T
- Page 1 Technical changes reserved! Due to further developments illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 10 http://www.wiltec.info...
- Page 2 The user is responsible for complying with the location specific safety and mounting regula- tions (you can ask an electrician) In case of device failure the repairs can be carried out only by an electrician or by the WilTec- repair service © by WilTec Wildanger Technik GmbH Seite 11 http://www.wiltec.info...
-
Page 3: Safety Guidelines
Switch 2: High-pressure switch without stop function, for other high pressure air tools 5. Automatic start without counter pressure extends the stability of the engine. 6. Overtemperature protection 7. Safety device for the air tank. Very low noise level © by WilTec Wildanger Technik GmbH Seite 12 http://www.wiltec.info... -
Page 4: User Notes
9. The lifetime of the compressor motor extends itself because the motor runs only when the tank requires it instead of always being turned on. Tanks are generally the first moisture traps. © by WilTec Wildanger Technik GmbH Seite 13 http://www.wiltec.info... - Page 5 5. For emptying the condensed water collector use the water drain plug. Asembly Mains plug Pressure regulator Manometer Air connection Drainage Double switch: Switch setting 1: Auto-Stop at 4 bar Switch setting 2: Maximum pressure at 6 bar © by WilTec Wildanger Technik GmbH Seite 14 http://www.wiltec.info...
- Page 6 List parts © by WilTec Wildanger Technik GmbH Seite 15 http://www.wiltec.info...
- Page 7 PIPE NUT TC-25T--#21 FRONT GASKET TC-25T--#47 PLUG TC-25T--#22 FRONT COVER TC-25T--#48 SAFETY VALVE TC-25T--#23 FILTER TC-25T--#49 ADAPTER TC-25T--#24 O-RING TC-25T--#50 SCREW TC-25T--#25 CYLINDER BLCCK TC-25T--#51 DRAIN VALVE TC-25T--#26 O-RING TC-25T--#52 MUFFLE © by WilTec Wildanger Technik GmbH Seite 16 http://www.wiltec.info...
- Page 8 All Wiltec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.
Need help?
Do you have a question about the TC-25T and is the answer not in the manual?
Questions and answers