Advertisement
Quick Links
Operation Instructions
Airbrush Compressor & Vacuum
Pump AS20W
ARTICLE 34202
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH
Seite 8
http://www.wiltec.info
Advertisement
Related Manuals for WilTec AS20W
Summary of Contents for WilTec AS20W
-
Page 1: Operation Instructions
Technical changes reserved! Due to further developments illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 8 http://www.wiltec.info... - Page 2 The user is responsible for complying with the location specific safety and mounting regula- tions (you can ask an electrician) In case of device failure the repairs can be carried out only by an electrician or by the WilTec- repair service ...
-
Page 3: Safety Guidelines
Very low noise level Field of application The airbrush compressor AS20W is suitable for airbrush work and can be used for handicraft cosmet- ics, tattoos, surface colours, hobby, model-toys, finger nails. It can also be used as air source for medical applications, environmental protection, aquariums, food and chemical industry, laboratories. - Page 4 The pressure level depends on the other hand on the nozzle diameter of the airbrush to which is connected; the bigger the nozzle diameter is, the larger the air quantity that can escape and the lower the working pressure of the compressor. © by WilTec Wildanger Technik GmbH Seite 11 http://www.wiltec.info...
- Page 5 Parts List © by WilTec Wildanger Technik GmbH Seite 12 http://www.wiltec.info...
- Page 6 All Wiltec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.